Distribution Interface | Grundig Digital Radio specs

DIGITAL RADIO GUIDE

TERRESTRIAL TRANSMISSION SYSTEMS - DRM

The energy dispersal provides an ordering of the bits that reduces the possibility of unwanted regularity in the transmitted signal.

The channel encoder adds redundant bits as a means for error protection and correction and defines the mapping of the digitally encoded information into QAM cells, which are the basic carriers of the information supplied to the transmitter for modulation.

Cell interleaving rearranges the time sequence of the bits as a means of “scrambling” the signal so that the final reconstruction of the signal at a receiver will be less affected by fast fading than would be the case if “continuous” speech or music were transmitted.

The pilot generator injects information that permits a receiver to derive channel- equalization information, thereby allowing for coherent (includes phase information) demodulation of the signal.

The OFDM cell mapper collects the different classes of cells and places them on a time-frequency grid.

OFDM depends on each of many subcarriers carrying its own sinusoidal amplitude/phase signal for a short period of time. The ensemble of the information on these subcarriers contains what is needed for transmission. In the case of DRM, for a 10 kHz channel, there are hundreds of subcarriers.

The modulator converts the digital representation of the OFDM signal into the analogue signal that will be transmitted via a transmitter/antenna over the air – essentially phase/amplitude representations as noted above modulating the RF.

With a non-linear high-powered transmitter, the signal is first split into its amplitude and phase components for injection in the anode and grid circuits, respectively, and then recombined (by the action of the transmitter itself set at the correct differential delay time), and then recombined prior to final emission. This splitting is not necessary for linear amplification.

(2)Distribution Interface

Referring to the extreme left of Figure 4.1, apart from audio and data applications that are multiplexed, additional information is sent that is required to instruct the transmitter to select the correct mode, error protection level, etc. and to send information in the transmission to the receivers to permit them to switch to the selection of several variables to allow for proper decoding. (The boxes and arrows for this are not shown directly in Figure 4.1.) In the aggregate, this collection of information and the means to get it to the transmitting station is called the “Distribution Interface” (DI).

These signals can emanate from a studio, or from a more elaborate network control centre, and be transmitted via land lines or via satellite circuits to the appropriate transmitter station(s). These details will not be noted here, but can be found in ETSI documents TS 102 821 and TS 102 820, both dated July 2003.

In terms of connections with other parts of the DRM system, these signals, as appropriate, are placed in either the Fast Access Channel (FAC) or the Service Description Channel (SDC) for transmission to receivers.

There are 4 categories of data associated with the Distribution Interface:

Digital Radio specifications

The Grundig Digital Radio represents a significant advancement in radio technology, combining aesthetics, functionality, and a user-friendly interface. As a pioneer in the audio and electronics industry, Grundig has successfully integrated modern digital capabilities into its traditional radio design, appealing to both nostalgic listeners and tech-savvy users.

One of the standout features of the Grundig Digital Radio is its versatility in reception. With DAB+ (Digital Audio Broadcasting) technology, users can enjoy a wide array of radio stations with superior sound quality, free from the hiss and interference commonly associated with analog broadcasts. The inclusion of FM and AM bands ensures that listeners are not limited, providing access to local stations that may not yet have transitioned to digital.

The Grundig Digital Radio is designed with ease of use in mind. Its intuitive interface, often featuring a clear LCD display, allows users to navigate through stations and settings effortlessly. Many models also include a built-in tuner that automatically scans and presets available stations, simplifying the setup process. For those who appreciate personalization, some variants come equipped with customizable presets, allowing users to save their favorite stations for quick access.

Portability is another key characteristic of the Grundig Digital Radio. Many models are lightweight and come with built-in handles, making them ideal for on-the-go listening, whether it's in the garden, on the beach, or during a picnic. Battery options, alongside mains power, ensure that users can take advantage of their radios wherever they choose.

In terms of sound quality, Grundig utilizes advanced audio technologies to deliver rich and clear sound. Enhanced bass responses and treble controls allow users to fine-tune their listening experience to match their preferences. Furthermore, many models feature additional inputs, such as AUX and USB ports, enabling users to connect their smartphones or other devices, expanding their audio options.

Other notable characteristics include built-in alarms and timers, which make the Grundig Digital Radio a versatile companion for daily routines. Some models even support Bluetooth connectivity, allowing for seamless streaming from a variety of devices.

In summary, the Grundig Digital Radio embodies the perfect blend of traditional radio appeal and modern digital technology, offering versatility, ease of use, superior sound quality, and portability to meet the diverse needs of today’s listeners. Its well-thought-out features and user-friendly design make it an excellent choice for anyone looking to enhance their audio experience.