1.Slide the FUNCTION SELECTOR to “ON” position and select the band, station, and volume level that you wish to hear when the alarm comes 'On', then slide the FUNCTION SELECTOR to the “AUTO” position. The alarm INDICATOR will light up.
2.Follow steps 2 to 4 in “SLEEP TO MUSIC” section above to set your desired sleep time.
3.The unit is now programmed to turn off automatically at the Sleep Time you selected and then to turn on at the preset “Alarm Time”.
4.To cancel the sleep timer before it counts down to "00" and shut the radio off, press the SNOOZE button.
IMPORTANT:
Remember that the station and volume settings you choose for the SLEEP TO MUSIC operation are the same settings you will hear if you set the alarm for wake to “MUSIC” the following morning.
CARE AND MAINTENANCE
1.If the cabinet becomes dusty, wipe the exterior with a soft dust cloth only. Never use dusting sprays or polishes on the cabinet.
2.If the cabinet becomes dirty or smudged with fingerprints it may be wiped with a soft cloth that has been slightly dampened with a mild soap and water solution. Never use abrasive cleansers or chemical solvents.
3.Always disconnect the power cord from the AC outlet before cleaning. Never allow any liquid to get inside the cabinet.
4.Should any solid object or liquid fall into the unit, unplug the unit and have it checked by qualified personnel before operating it any further.
NOTE
If there is no battery in the
| SPECIFICATION |
Frequency Range: | AM 530 – 1710 kHz |
| FM 88 – 108 MHz |
AC Power Source: | 120V~ 60Hz |
Backup Battery: | 1 x 9V 006P type 6F22 battery (not included) |
At Spectra, environmental and social responsibility is a core value of our business. We are dedicated to continuous implementation of responsible initiatives with an aim to
conserve and maintain the environment through responsible recycling.
Please visit us at http://www.spectraintl.com/green.htm for more information on Spectra’s green initiatives or to find a recycler in your area.
90 DAY LIMITED WARRANTY AND SERVICE
10