SETTING THE CLOCK
When you connect the radio to an AC outlet for the first time the clock display will begin flashing "12:00". The flashing will stop when you set the time.
1.Press and hold the TIME SET button and then press the FAST button to set the coarse time.
2.Press and hold the TIME SET button and then press the SLOW button to set the correct Hour/Minute.
NOTE
There is a PM INDICATOR located in the bottom
LISTENING TO THE RADIO
1.Set the AM/FM BAND SELECTOR to the desired band, AM or FM.
2.Slide the FUNCTION SELECTOR to the “ON” position.
3.Select your desired station with the TUNING knob.
4.Adjust the VOLUME knob to the desired listening level.
5.When you have finished listening, slide the FUNCTION SELECTOR to the “OFF” position to turn the radio off.
TIPS FOR BEST RADIO RECEPTION
AM - The AM antenna is built inside the radio. If AM reception is weak, slightly rotate the unit or change the position of the unit until the internal antenna picks up the strongest signal.
FM - If FM reception is weak, fully extend the wire antenna and vary the position and location of the antenna until you find the strongest signal.
CHARGING YOUR SMART PHONE
This unit provides a standard USB port to charge the rechargeable battery of your smart phone if your smart phone comes with a charging cable with a standard USB plug.
1.Simple connect your smart phone via the charging cable included in your phone, plug the USB plug of the cable into USB port locates on rear of the unit. The battery charging will start immediately.
2.Unplug the cable if your smart phone has been fully charged.
Note: Because of large variety of smart phones and different circuitry, not every smart phone can be charged in this way. Refer to your smart phone user manual before you charge them in this way.
AUX IN OPERATION
7