5.Turn the FUNCTION knob to select the correct channel for your area, as identified by NOAA. Adjust antenna to ensure clear reception.
6.Press the SAVE key to save the channel and return to normal operation.
7.Setting the Specific Area Message
Encoding (S.A.M.E.) location
The
To select your S.A.M.E. location, simply select your state, county and county subdivision at the menu prompts as described below.
To set your SAME location:
1.Press and hold the PROG key until SET DATE/ TIME is displayed on the screen.
2.Turn the FUNCTION knob to select the SETUP LOCATIONS menu. Press the NEXT ( “>”) key to enter the SETUP LOCATIONS menu.
3.SET LOCATION 01 will be displayed on the screen. Press the NEXT ( “>”) key to enter the SELECT STATE menu.
4.Turn the FUNCTION knob until you locate the desired state. Press the NEXT( “>”) key to enter the SELECT COUNTY menu.
5.Turn the FUNCTION knob until you locate the desired county. Press the NEXT ( “>”) key to enter the SELECT SUBDIVISION menu.
6.Turn the FUNCTION knob to scroll through the subdivisions within a county. For ex. NorthEast
Note: Setting the subdivision to ANY (0) will receive all alerts broadcast in the entire county.
7.Press the NEXT ( “>”) key when you have selected the subdivision of your county .
8.Press the SAVE key to save your SAME location and return to normal operation.
NOTE: Because broadcast areas overlap you may want to set more than one S.A.M.E. location. To set more than one S.A.M.E. location, you must complete the above steps for each location desired. Repeat steps 1 and 2 above. Upon entering the SETUP LOCATIONS menu in step 3, turn the FUNCTION KNOB to select an alternate location, press the NEXT ( “>”) key and proceed as prompted through step 8. 13