Power failure backup:
The power failure backup batteries ensure that the time and
1)Slide the battery compartment cover to the side.
2)Connect the battery. Always pay attention to the correct polarity.
3)Close the battery compartment cover.
Fixing the radio in position:
• Place the radio on to the mounting plate and slide it to the rear.
Power supply:
• Insert the plug into a 230 V / 50 Hz supply socket.
Wire aerial:
• Unwind the wire aerial fully and fix it in place using e.g. adhesive tape.
SETTING THE TIME
Press and hold down the time button and press the hours button or the minutes button as required to set the correct time. PM is indicated by a small dot in the upper left corner of the display.
RADIO
Switching on the radio: Slide the On/Off switch into the RADIO ON position. A dot lights up on the display to indicate that the radio is switched on.
Band selection: Use the band selector to select the band (FM = VHF, AM = MW).
Station selection: Set the radio to the required station using the STATION selector . You can read the frequency set on the scale . It may be necessary for you to adjust the position of the aerial. When you find good reception, you can fix the aerial in place with some adhesive tape.
Volume adjustment: Use the volume control to change the volume.
TIMER
Your kitchen radio has an integrated timer. You can set any time you like between 1 minute
and 1 hour and 59 minutes. Time is counted down and the remaining time is shown in the display .
Setting the time:
1) First of all make sure that the RADIO switch is set to ON or OFF (and not to AUTO !).
2) Slide the timer switch to ON.
First the display shows a standard value of 0:59 - which means a countdown period of 59 minutes.
5