Bench KH 994 manual Alarm

Page 6

3)

To increase the countdown period press the hours button .

 

The display now shows 1:59 – this is the maximum countdown period.

4)

To change the minutes setting, press the minutes button . As you hold down the minutes button ,

 

the minutes are automatically decreased. Release the minutes button when the required

 

countdown period is shown.

Stopping the timer:

1)When the set countdown period has elapsed, the radio sounds a tone.

2)To switch off the tone or to terminate the countdown timer before the end, slide the timer switch

to OFF. The display returns to showing the current time.

ALARM

You can use the kitchen radio as an alarm clock. You can choose whether to be woken by the radio or by an alarm tone.

Setting the wake-up time:

Press and hold down the wake-up time button and press the hours button or the minutes button as required to set the correct wake-up time.

Wake-up with radio:

1)

First set the radio to the required station using the STATION selector . You can read the frequency

 

set on the scale .

 

2)

Use the volume control

to set the volume at which you would later wish to be woken.

3)

Slide the On/Off switch

into the AUTO position. A dot lights up on the display to indicate

 

that the alarm is switched on.

4)

The radio will now switch on at the set wake-up time.

Wake-up with alarm tone:

1)

Rotate the volume control

in the quiet direction until it reaches the stop - make sure you can hear

 

the volume control engage.

2)

Slide the On/Off switch

into the AUTO position. A dot lights up on the display to indicate that

 

the alarm is switched on.

 

3)The radio will sound an alarm tone at the set wake-up time.

4)The alarm tone will switch itself off automatically after approx. 2 hours. Of course, you can switch of the alarm tone before this. Further details can be found in the next section.

Switching off the alarm tone:

• Press the wake-up time button to switch off the alarm tone.

The set wake-up time remains unaltered. The set time for the alarm signal or the radio is retained for the next day.

• To switch off the alarm function, slide the On/Off switch

into the OFF position.

Do not forget to reset the volume control if you wish to listen to the radio in the meantime.



6

Image 6
Contents Page Page Page Wake-up time button Volume control Time button Important Safety AdviceOperating Features Preparation / MountingSetting the Time TimerRadio Alarm Maintenance Technical InformationDeclaration of Conformity