Blaupunkt Nevada DJ72 Adjusting the Volume, Adjusting the volume, Setting the power-on volume

ADJUSTING THE VOLUME

Adjusting the volume

The volume can be adjusted in stages from 0 (off) to 50 (maximum).

➮To increase the volume, turn the volume control 1 to the right.

➮To decrease the volume, turn the volume control 1 to the left.

Setting the power-on volume

You can set the unit’s default power-on volume.

➮Press the MENU button 8.

➮Press the softkey 4 assigned to the “VOL” display item.

➮Press the softkey 4 assigned to the “ON” display item.

➮Set the required volume using the volume control 1.

➮Press the joystick OK 7 or the MENU button 8 to close the menu.

The settings are saved.

Note:

To avoid damage to your hearing, the power-on volume is limited to a value of “40”.

Activating mute

This feature allows you to instantane- ously reduce the volume (mute).

➮Press the AUDIO button 9for longer than two seconds

“MUTE” appears in the display.

Cancelling mute

➮Briefly press the AUDIO button 9.

or

➮turn the volume control 1.

Telephone audio / navigation audio

If your car radio is connected to a mo- bile telephone or a navigation system, the unit’s volume will be muted as soon as you “pick up” the telephone or as soon as a navigation announcement is made. The caller or voice output will then be heard over the car radio loud- speakers. In order for this to work, the mobile telephone or navigation system must be connected to the car radio in the manner described in the installation instructions.

You can find out from your Blaupunkt dealer which navigation systems can be used with your car radio.

If a traffic information message is re- ceived during a telephone call or whilst a navigation announcement is being made, the traffic message will only be played after the call or voice output is finished.

38