Audiovox FR-214 warranty Powering the transceiver, Installing the batteries

Page 3

Powering the transceiver:

Your FR-214 radio transceiver kit includes three rechargeable AA batteries (RBP-214) and a charging station. You may operate your FR-214 using the rechargable batteries included or you may use alkaline batteries. Alkaline batteries will provide slightly better performance than the rechargable batteries.

Installing the batteries:

To install batteries into the radio, it is necessary to remove the belt clip. To do this you will need to rotate its thumbscrew counterclockwise. Next, release the battery compartment lock on the bottom of the transceiver by sliding it outward. The battery cover can now be removed by sliding it downward towards the bottom of the transceiver. Observe the polarity symbols on the bottom of the tray when inserting the batteries and replace the cover. Remember to lock the cover in place with the latch and replace the belt clip.

1 Remove belt clip

2 Release battery

3 Insert batteries

thumbscrew

cover lock

 

 

2

 

128-5379C

3 of 12

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model FR-214 Model FR-214 Installing the batteries Powering the transceiverMoni Button OperationCharging the RBP-214 batteries POW Button redLock/Function Button Low Battery WarningSignal Strength Indicator SSI UP and Down ButtonsSetting the channel Scan ModeUsing the Ctcss feature Turning the button beep tones on and off Setting the squelch levelScrolling to the beginning of the function setting mode Problem Possible cause Correction TroubleshootingChannel Frequencies Technical SpecificationsFreq. Hz Continuous Tone Coded Squelch System Tone FrequenciesDAY Limited Warranty
Top Page Image Contents