Audiovox FR-214 warranty Setting the channel, Scan Mode, Using the Ctcss feature

Page 6

Setting the channel:

Press the Function/lock Button once

The channel number will flash on the display, indicated by “CH_xx.” Pressing the up or down buttons, momentarily, within five seconds will increment or decrement through the 14 channels one at a time.

Scan Mode:

While in channel setting mode, indicated by the channel number flashing, press and hold the up or down buttons for 2 seconds to activate the Scan Mode. “Scan” will be shown on the right side of the display. While in the scan mode the transceiver will pause on active channels when receiving a transmission. Press the Lock or PTT buttons momentarily to stop scanning channels.

Important: The Scan Mode will not operate if the squelch setting is on “00”

Setting the CTCSS (Continious Tone Coded Squelch System) privacy code:

Press the Function/lock button twice

The CTCSS privacy code will flash on the display indicated by “Ct-xx.” Pressing the up or down buttons, within 5 seconds will change through the 38 CTCSS privacy codes one at a time.

Using the CTCSS feature

Press the Function/lock button three times

5

128-5379C

6 of 12

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model FR-214 Model FR-214 Powering the transceiver Installing the batteriesPOW Button red OperationCharging the RBP-214 batteries Moni ButtonUP and Down Buttons Low Battery WarningSignal Strength Indicator SSI Lock/Function ButtonSetting the channel Scan ModeUsing the Ctcss feature Setting the squelch level Turning the button beep tones on and offScrolling to the beginning of the function setting mode Troubleshooting Problem Possible cause CorrectionTechnical Specifications Channel FrequenciesContinuous Tone Coded Squelch System Tone Frequencies Freq. HzDAY Limited Warranty
Top Page Image Contents