Cobra Electronics MR F75 Weather Radio And Alert, Public Address, Weather Alert Set-Up

Page 25

Voice Transmission

Operating Your Radio

Public Address

Another form of voice transmission is available on your radio. It can be used in Public Address (PA) mode to hail other vessels or people near the shore if you have mounted and connected an optional PA speaker.

PA Mode

To Switch The Radio From RF Transmit To PA Mode:

1.

Enter the Settings menu and scroll to PA MODE

 

with the Up/Down buttons.

2.

Press the Call/Set button and observe the current

 

setting — ON or OFF.

Weather Radio And Alert

Operating Your Radio

NOAA All Hazards/Weather Radio And Alert

NOAA broadcasts Weather information as described in the NOAA Weather Channels section on page 25 of this manual. You can listen to one (1) or two (2) of these ten (10) receive-only channels at any time.

NOTE

Usually only one (1) or two (2) of the weather channels will be operating in any given location. You will need to select the channel with the strongest signal in your location. This is the channel the radio will scan for the weather alert signal.

3. Use the Up/Down buttons to change to the setting.

On/Off

4. Press the Call/Set button to select the setting.

5.Use the Up/Down buttons to scroll to EXIT.

6.Press the Call/Set button to return to the Settings menu.

 

To Broadcast On The PA Speaker:

Talk Button

1. Switch to the PA mode.

2.Press the Talk button and speak into the microphone/speaker.

NOTE

Weather/UIC Button

Weather Mode

To Listen To The Weather Channels:

1.From Standby mode, press the Weather/UIC button. The unit will enter the Weather mode and show it on the LCD.

2.Press the Up/Down buttons to change the weather channels — hold the button for fast advance.

To exit the Weather mode and return to Standby mode, press the Weather/UIC button again.

While in the PA mode:

When the Talk button is pressed, the output is

directed to the PA speaker and not transmitted

Weather Alert Set-Up

You must have Weather Alert mode turned On to benefit from the Weather Alert condition signal described in the NOAA weather channels section on page 25.

as a radio signal through the antenna.

Received radio messages will be directed to the

PA speaker unless the Talk button is pressed.

Weather Alert

On/Off

To Turn Weather Alert On:

1.Enter the Settings menu and scroll to WX ALERT (weather alert) with the Up/Down buttons.

2.Press the Call/Set button and observe the current setting — ON or OFF.

3.Use the Up/Down buttons to change to the setting.

4.Press the Call/Set button to select the setting.

5.Use the Up/Down buttons to scroll to EXIT.

6.Press the Call/Set button to return to the Settings menu.

44 English

Nothing comes close to a Cobra® 45

Image 25
Contents MR F75 For Assistance Outside The U.S.A Customer Assistance For Assistance In The U.S.AMicrophone/Speaker Product Features Transceiver Controls Indicators And ConnectionsTable Of Contents Important Safety Information Important Safety InformationSafety Training Information Always use only Cobra authorized accessoriesFCC Information Voice Calling VHF Marine Radio ProceduresMaritime Mobile Service Identity Mmsi Maritime Mobile Service Identity MmsiDigital Selective Calling DSC Digital Selective Calling DSCRadiotelephone Calls Emergency Messages Distress ProcedureMarine Distress Procedure DSC Marine Distress ProcedureTell where you are SayVHF Marine Channel Assignments 03A Government Only International Distress, Safety and Calling23A Government Only 21A U.S. Government Only Canada Coast Guard OnlyDigital Selective Calling Voice communications not allowed 64A U.S. Government Only Canada Commercial Fishing79A 78A80A 81ANoaa Weather Channels Alert World City Time ZonesIncluded In This Package Mounting Powering The RadioMicrophone/Speaker Bracket Electrical Power ConnectionFlush Mount Antenna Requirements And Attachment Installation RequirementsRadio Operator Requirements Safe Maximum Permissible Exposure MPE RadiusExternal Devices Connections Power On-Off Tones And AlarmsVolume Getting StartedSquelch Standby And ReceiveSet-Up Routines Set-Up Routines Settings MenuLCD Backlight LCD ContrastA./International/Canada Channel Maps To Set Your Radio For The Area In Which You Will Be Using ItVoice Transmission Transmit Power OutputVoice Transmission ChannelsPublic Address Weather Radio And AlertNoaa All Hazards/Weather Radio And Alert Weather Alert Set-UpAdvanced Operation Weather Alert SignalAdvanced Operation Tri-WatchMemory Scan Memory ChannelsDSC Set-Up DSC Set-UpUser Mmsi Number If You Incorrectly Enter Your Mmsi NumberGroup Mmsi Number If You Transfer Your Radio To a Different VesselDSC Scanning Individual Directory Position Request Reply TypeTo Set The Position Request Reply Type To Enter Or Edit Names And Mmsi Numbers In The DirectoryDSC Operation DSC OperationSending Distress Calls Sending An All Ships Calls Receiving Distress CallsRegarding Distress Relay Calls Receiving Distress Relay CallsSending An Individual Call Receiving An All Ships CallSending a Geographical Call Receiving a Geographical CallReceiving a Group Call Receiving An Individual CallSending a Group Call Sending a Position RequestIf You Receive a Position To Exit The Position Request ModeIf The Station You Called Cannot Send Its Position If The Station You Called Chose Not To ReplySending a Position Send Receiving a Position RequestReceiving a Position Send Standby Mode SignalCall Waiting Specifications Maintenance TroubleshootingMaintenance TroubleshootingProduct Service WarrantyExclusions This limited warranty does not apply For Products Purchased In the U.S.AOrdering From U.S.A Order Form Optional AccessoriesMake check or money order payable to