Cobra Electronics PR4750wx VibrAlert and Call Alert, Call Tone Settings, To change call settings

Page 14

Mode Functions

Operation

VibrAlert® and Call Alert

•

Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently or both.

 

 

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

 

10 Call Tone Settings

•

You can choose from 10 different call tone settings to transmit a unique call alert.

Lock/Mode Button

Channel Buttons

To change call settings:

1.Press the Lock/Mode button until the Call Setting icon flashes on the display. The current setting (“01” vibrate + ring, “02” vibrate only or “03” ring only)

is displayed.

2.Press the Channel Up or Channel Down button to change the call setting.

3.Choose one of the following:

VibrAlert® + Ring

VibrAlert® Only

Ring Only

Lock/Mode Button

 

To change a call tone setting:

 

1.

Press the Lock/Mode button until the

 

 

 

letter “C” and the current call tone number

 

 

 

(01 through 10) is displayed.

 

2.

Press the Channel Up or Channel Down

Call Tone Setting

 

 

 

button to hear the other call tone settings.

 

 

3. Choose one of the following:

 

 

 

a. Press the Lock/Mode button to enter the

 

 

 

new setting and proceed to other functions.

Channel Buttons

 

 

 

 

 

b. Press the Hi•Low/Enter button to enter the

 

 

 

new setting and return to Standby mode.

a. Press the Lock/Mode button to enter the new setting and proceed to other functions.

b. Press the Hi•Low/Enter button to enter the new setting and return to Standby mode.

22 English

Roger Beep Confirmation Tone

•

Roger Beep is an audible tone that your listener will hear when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak.

Lock/Mode Button To turn roger beep on or off:

1.Press the Lock/Mode button until the Roger Beep icon flashes on the display. The current on or off setting is displayed.

Roger Beep On 2. Press the Channel Up or Channel Down button to select roger beep on or off.

3.Choose one of the following:

a. Press the Lock/Mode button to enter

Channel Buttonsthe new setting and proceed to other functions.

b. Press the Hi•Low/Enter button to enter the new setting and return to Standby mode.

Nothing comes close to a Cobra® 23

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Making Life Easier and Safer Product Features FeaturesCaring for Your microTALK Radio Avoid exposure to extreme temperaturesBatteries To install or replace batteries Using Your Radio To toggle between high and low power Volume To adjust the volumeSelectable HighLow Power Output Lock FeatureScrolling through Mode Functions HiLow Power/EnterSignal Strength Meter Dual Function ButtonsOn the display 01 through Mode FunctionsPrivacy Codes To proceed to stepVoice Activated Transmit VOX Lock/Mode Button To turn VOX mode on or offNOAA* All Hazards Radio Channels To set VOX sensitivityThrough 38 for the channel Memory LocationsLock/Mode Button To program a memory location To de-program a memory location To recall a stored memory channel locationThrough While recalling a stored memory locationTo scan channels Channel ScanYour microTALK radio can automatically scan channels Flash on the displayPrivacy Code Scan To scan privacy codesTo scan memory locations Then return the radio to Standby modeMemory Location Scan To change a call tone setting Call Tone SettingsTo change call settings VibrAlert and Call AlertKeystroke Tones Mode Functions General SpecificationsGeneral Specifications Lock/Mode Button To change keystroke tonesFCC License Product Service Product Service QuestionsTrademark Acknowledgement Warranty and Trademark AcknowledgementLimited One-Year Warranty
Top Page Image Contents