Cobra Electronics PR4750wx Memory Locations, Lock/Mode Button To program a memory location

Page 9

Mode Functions

Operation

10 Memory Locations

•

Your microTALK® radio has 10 Memory Locations for storing your most frequently used channels and channel/privacy code combinations. These Memory Locations can be selected individually or can be scanned. (See page 20 for memory location scan.)

Lock/Mode Button To program a memory location:

1.Press the Lock/Mode button until the Memory icon and the memory location flash on the display.

 

 

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

 

6. Choose one of the following:

a. Press the Channel Up or Channel Down

button to select a CTCSS privacy code

(01 through 38) for the channel.

b. Press the Hi•Low/Enter button to

switch from CTCSS to DCS. The DCS

icon and privacy code numbers will

flash on the display. The Channel Up

or Channel Down button can then be

used to select a DCS privacy code

Memory Icon

Channel Buttons

Hi•Low/Enter Button

2.Press the Channel Up or Channel Down button to select the memory location (0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Hi•Low/Enter button to enter a new memory location or edit an already programmed memory location. The channel numbers will flash on the display.

4.Press the Channel Up or Channel Down button to select a channel (1 through 22).

5.Press the Hi•Low/Enter button. The CTCSS icon and privacy code numbers will flash on the display.

(01 through 83) for the channel.

If “OF” flashes in place of the privacy code numbers, a privacy code is already set in the opposite (CTCSS

or DCS) system. Press the Channel Up or Channel Down button to cancel the opposite code and select a privacy code from the active system for the selected channel.

7.Choose one of the following:

a.Press the Hi•Low/Enter button to enter the channel/privacy code in the selected memory location and return to Step 1 to program another memory location.

b.Press the Lock/Mode button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.

c.Press the Talk button to enter the channel/privacy code in the selected memory location and exit mode functions. Upon release of the Talk button, the radio will enter Standby mode on the channel/privacy code just entered.

12 English

Nothing comes close to a Cobra® 13

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Making Life Easier and Safer Features Product FeaturesAvoid exposure to extreme temperatures Batteries To install or replace batteriesCaring for Your microTALK Radio Using Your Radio Selectable HighLow Power Output Volume To adjust the volumeTo toggle between high and low power Lock FeatureSignal Strength Meter HiLow Power/EnterScrolling through Mode Functions Dual Function ButtonsPrivacy Codes Mode FunctionsOn the display 01 through To proceed to stepNOAA* All Hazards Radio Channels Lock/Mode Button To turn VOX mode on or offVoice Activated Transmit VOX To set VOX sensitivityMemory Locations Lock/Mode Button To program a memory locationThrough 38 for the channel Through To recall a stored memory channel locationTo de-program a memory location While recalling a stored memory locationYour microTALK radio can automatically scan channels Channel ScanTo scan channels Flash on the displayTo scan privacy codes Privacy Code ScanThen return the radio to Standby mode Memory Location ScanTo scan memory locations To change call settings Call Tone SettingsTo change a call tone setting VibrAlert and Call AlertGeneral Specifications Mode Functions General SpecificationsKeystroke Tones Lock/Mode Button To change keystroke tonesProduct Service Questions FCC License Product ServiceWarranty and Trademark Acknowledgement Limited One-Year WarrantyTrademark Acknowledgement
Top Page Image Contents