Basic Operation
!Before turning on your radio for the first time, you should ensure power connections have been made correctly and all antenna connections are proper and secure.
Turning the Radio On and Off
Rotate the power/volume knob clockwise past the detent to turn on the radio. Rotate the power/volume knob further clockwise to increase the volume. Rotate the power/volume knob counterclockwise past the detent to turn off the radio.
If “PP” is displayed after turning on the radio, you must enter the programmed password (4 keypress sequence) to use the radio. Consult your dealer or communications coordinator if you have further questions.
Channel Selection
Use the up and down keys to select the desired operating channel. Please consult your dealer or communications coordinator regarding channels programmed in your radio.
Press and hold the up and down keys to quickly scroll through the available channels.
Receiving Transmissions from Other Radios
Each channel of your radio may be programmed for carrier squelch operation, CTCSS/DCS operation or
Carrier Squelch Operation
A signal that matches the programmed receive frequency will be heard if it is of sufficient strength to exceed the squelch threshold. An on frequency signal exceeding the squelch
12 | ♥ 2004, Midland Radio Corporation |