Panasonic SA-XR10 specifications Radio, Manual tuning, Preset tuning

The radio

RECEIVER

DVD TV VCR

TUNER/

BAND

TUNER/	DIGITAL	INPUT
BAND		SELECTOR
RECEIVER

RECEIVER TOP MENU MENU

		ENTER
	DISPLAY			RETURN
	SKIP		SLOW /SEARCH
	STOP	PAUSE		PLAY
	SOUND MODE CHANNEL		VOLUME	MUTING	1	2	3
	SFC			SUBWOOFER
					4	5	6
	1	2	3	TEST
	4	5	6	TONE	7	8	9
DIRECT TUNING/	7	8	9	DELAY
DISC	DIRECT TUNING/	0				0
			10/ENTER LEVEL
	DISC
	L BALANCE	R
	TV VOL		TV/VIDEO	TIMER

Manual tuning

On the remote control

1. Press [TUNER/BAND RECEIVER].

The band changes each time you press the button.

2.Press [DIRECT TUNING/DISC].

3.Press the numbered buttons to enter the

frequency.

Tuning intervals: FM–0.1 MHz, AM–10 kHz

e.g. To select 107.9 MHz, press [1] / [0] / [7] / [9] “TUNED” lights when tuned.

“STEREO” lights during FM stereo broadcasts.

Note

1.If you do not press a button while the cursor is flashing, the display returns to the frequency being received.

2.If the frequency has not been input correctly, “ERROR” will be displayed.

INPUT SELECTOR FM MODE MEMORY 2 TUNING 1

Preset tuning

Automatic presetting

1.Press [INPUT SELECTOR] to select “TUNER (FM)”.

2.Press [TUNING 2 or 1] to tune to “FM 87.9 MHz”.

3.Press and hold [MEMORY].

The FM stations the unit can receive are preset in channels 1 to 30.

4.Press [INPUT SELECTOR] to select “AM”.

5.Press [TUNING 2 or 1] to tune to “AM 530 kHz” .

6.Press and hold [MEMORY].

The AM stations the unit can receive are preset in channels 21 to 30.

(FM stations are replaced if any were preset in these channels.)

During automatic presetting, the memory indicator (˜) flashes and the frequency scrolls. The memory indicator and channel numbers are displayed for a second when a station is preset.

The last station to be preset is displayed when presetting finishes.

Operations

RQT6501

On the main unit

1.Press [INPUT SELECTOR] to select “TUNER (FM)” or “AM”.

“FM” appears 2 seconds after you select “TUNER”.

2.Press [TUNING 2 or 1] to select the frequency of

the station.

Tuning intervals: FM–0.2 MHz, AM–10 kHz

Automatic tuning

Hold down [TUNING 2 or 1] until the frequency begins to scroll. Tuning stops when a station is found. (Tuning may stop if there is interference.)

Improving reception

¡FM mode

You can improve FM reception by switching reception to monaural. Press [FM MODE].

“MONO” lights.

Press [FM MODE] again to cancel.

¡For your reference

Some equipment can interfere with radio reception. Turn off nearby TV, VCR, DVD players, and satellite receivers or move them further away from the antennas if this occurs.

Manual presetting

Preset the stations one at a time.

1.Tune to the station.

2.Press [MEMORY].

3.Press [TUNING 2 or 1] to select a channel.

4.Press [MEMORY].

For your reference

FM stations can also be preset in the MONO mode.

18