Panasonic SA-XR10 specifications Specifications IHF’78, Product Service

Specifications (IHF’78)

■ AMPLIFIER SECTION

Rated minimum sine wave RMS power output
20 Hz–20 kHz both channels driven
0.9 % total harmonic distortion	100 W per channel (6 Ω	)
1 kHz continuous power output both channels driven
0.3 % total harmonic distortion	100 W per channel (6 Ω	)
Total harmonic distortion
rated power at 20 Hz–20 kHz	0.9 % (6 Ω	)
half power at 1 kHz	0.08 % (6 Ω	)
Power output at 1kHz each channel driven
0.9 % total harmonic distortion
Front	2 x 100 W (6 Ω	)
Center	100 W (6 Ω	)
Surround	2 x 100 W (6 Ω	)

Load impedance
Front	6–8 Ω
Center	6–8 Ω
Surround	6–8 Ω
Frequency response
DVD/DVD 6CH, VCR, TV	10 Hz–44 kHz, ±3 dB
Input sensitivity
DVD/DVD 6CH, VCR, TV	27 mV (200 mV, IHF ’66)
S/N (IHF A)
DVD, TV (DIGITAL INPUT)	90 dB (98 dB, IHF ’66)
Input impedance
DVD/DVD 6CH, VCR, TV	22 kΩ
Tone controls
BASS	50 Hz, +10 to –10 dB
TREBLE	20 kHz, +10 to –10 dB
Subwoofer frequency response (–6 dB)	7–200 Hz
Digital input
Optical	2
Coaxial	1

■ FM TUNER SECTION

Frequency range	87.9–107.9 MHz
Sensitivity	11.2 dBf (2 µV, IHF ’58)
50 dB quieting sensitivity
MONO	18.3 dBf (4.5 µV, IHF ’58)
STEREO	38.3 dBf (45 µV, IHF ’58)
Total harmonic distortion
MONO	0.2 %
STEREO	0.3 %
S/N
MONO	73 dB
STEREO	67 dB
Frequency response	20 Hz–15 kHz, +1 dB, –2 dB
Alternate channel selectivity	65 dB
Capture ratio	1.5 dB
Image rejection at 98 MHz	40 dB
Spurious response rejection at 98 MHz	75 dB
AM suppression	50 dB
Stereo separation
1 kHz	40 dB
10 kHz	30 dB
Antenna terminal	75 Ω (unbalanced)

■ AM TUNER SECTION

Frequency range	530–1710 kHz
Sensitivity	20 µV, 330 µV/m
Selectivity	55 dB
IF rejection at 1000 kHz	50 dB

■ VIDEO SECTION

Output voltage at 1 V input (unbalanced)	1±0.1 Vp-p
Maximum input voltage	1.5 Vp-p
Input/output impedance	75 Ω

■ GENERAL

Power supply	AC 120 V, 60 Hz
Power consumption	115 W
Dimensions (W x H x D)	430 x 52 x 334 mm
	(16-15/16'' x 2-1/16'' x 13-5/32'')
Mass	3.5 kg (7.7 lb.)

Power consumption in standby mode: 1 W

Notes:

1. Specifications are subject to change without notice. Mass and dimensions are approximate.

2. Total harmonic distortion is measured by the digital spectrum analyzer.

Product Service

1.Damage requiring service — The unit should be serviced by qualified service personnel if:

(a)The AC power supply cord or the plug has been damaged; or

(b)Objects or liquids have gotten into the unit; or

(c)The unit has been exposed to rain; or

(d)The unit does not operate normally or exhibits a marked change in performance; or

(e)The unit has been dropped or the cabinet damaged.

2.Servicing — Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.

3.Replacement parts — When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

4.Safety check — After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

Product information

For product information or assistance with product operation:

In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211- 7262, or e-mail consumerproducts@panasonic.com, or web site (http://www.panasonic.com).

In Canada, contact Panasonic Canada Inc. Customer Care Centre at 905-624-5505, web site (www.panasonic.ca), or an authorized Servicentre closest to you.

Reference

RQT6501

23