Uniden owner manual Operating the UH013 in Duplex Mode, Scanning, Open Scan OS Mode

UNIDEN Model UH013 UHF CB Radio

Operation

Operating the UH013 in Duplex Mode

For this example we are adopting CH01 as the channel being used in your area for repeater use.

Press and hold DUP for 2 seconds to switch
Duplex ON. The DUP icon appears.
If Duplex is not required - press DUP and hold for		CAL TSQ DUP
	MON SCN GS BCL INS
2 seconds again to switch Duplex off.	SLT	SRC HLD SQT M			VOL
Only channels 01 - 08 are available for Duplex		MHz			S/RF
	SRCH	SCAN	MEM	INST	SQT
	TSQ	OS/GS	DUP	SET/SKIP	CTCSS

NOTE	Check with your local Retailer for
	information on available Repeaters.

Scanning

The UH013 has a scanning feature that allows you to search for active channels automatically.

Furthermore, the UH013 is designed to have two types of scanning; Open Scanning (OS) and Group Scanning (GS), to give you flexibility and allow you to use the radio more effectively.

Press SCAN and Scanning starts. The SCN icon appears.

Press SCAN again to stop scanning.

	CAL TSQ DUP
MON SCN GS BCL INS
SLT	SRC HLD SQT M
	MHz			S/RF
SRCH	SCAN	MEM	INST	SQT

TSQ OS/GS DUP SET/SKIP CTCSS

Open Scan (OS) Mode

Allows continuous scanning of channels stored in the Open Scan memory. If an active channel is found, scanning will stop on that channel.

This example shows CH40 active.				CAL TSQ DUP	VOX
				MON SCN GS BCL INS	CTCSS
If the received signal ceases, the unit will wait 3 seconds for the signal				SLT SRC HLD SQT M
to return, otherwise scanning resumes.				MHz	S/RF
To skip the active channel, press MEM		momentarily. Scanning resumes. To deactivate SCAN, press SCAN
or the PTT button on the microphone.
	If SCAN is deactivated while on an
	active channel, the UH013 will stay on
	that active channel. If no channels are
NOTE	active, the UH013 will reinstate the		NOTE	OS Mode is indicated by the absence of
	starting channel.			the GS icon.

10