UNIDEN Model UH013 UHF CB Radio
Mounting Options
The radio can be mounted complete - or - with the Display Unit remote of the Transceiver.
Mounting the complete radio (Transceiver with Display Unit)
a) Plug in display cable from the Display Unit to the transceiver.
b) Hinge the Display Unit into the b transceiver as shown in the
diagram, then snap closed.
a
c)Should you wish, at a later stage, to position the Display Unit remote from the Transceiver, release the Display Unit by pushing up the slide on the side.
c b
Remote mounting of the Transceiver Unit
e d 
If the Display Unit is not already separate of the Transceiver then remove it as detailed in c) above.
Fix the Transceiver Mounting Bracket in an appropriate location (screws and washers supplied). Then fix the Transceiver in the bracket using the Knob bolts supplied d).
The bracket can be fixed on the top or under the transceiver. An arced slot e) allows you to mount the transceiver at an angle.
6