P3 International E 9300 operating instructions 9305, Base unit

Page 8

The sensor will now be in synchronisation mode for about 5 minutes, during which one data packet will be sent every 4 seconds.

-Close the housing again by pushing it up and turning it clockwise until it engages.

-Erect the now fully assembled sensor within the possible transmission radius (up to 300 ft. in the open, but make allowances for the attenuating effects of walls etc.) so that it stands alone in such a way that both precipitation can fall directly into the rain sensor and that the wind measurement is not distorted by nearby build- ings, trees etc.

A sunny spot is possible, since the temperature sensor is located in a shaded and ventilated area of the housing.

-Push the earth spike far enough into the soil for the sensor to stand securely and the devices to be about 6 ft. above ground level.

E 9305

For the installation, addressing and commissioning of this sensor, please refer to the operating instructions supplied with the unit.

2.2. Base unit

The weather station is operated with 4 x 1.5 V AA batteries (alkaline).

- If the stand of the weather station is already assem-

 

 

 

 

bled, detach it by pressing back the station while

 

 

 

 

the stand is held firmly on a table.

+

–

+

–

- Open the battery compartment on the rear of the

station by lifting it up and insert four AA batteries

 

 

 

 

according to the poling marked in the compartment.

 

 

 

 

- Close the battery compartment again.

 

 

 

 

- After a display test phase in which the display shows

 

 

 

 

all the available segments, the weather station goes

 

 

 

 

into a synchronisation phase for 15 minutes. During

 

 

 

 

this time all the received radio weather sensors will

 

 

 

 

be displayed immediately one after the other. If all

–

+

–

+

the sensors you installed have already been received,

you can end synchronisation mode early by pressing

 

Bottom

 

any key, provided that the E 9301 has left its

 

 

 

 

synchronisation mode (this takes about 5 minutes).

 

 

 

 

-After synchronisation all weather data are displayed as normal as shown in page 6. Only sunrise and sunset and the moon phase are not yet displayed, because the clock and calendar have yet to be set.

-Configure the base unit as described under 3.1.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Professional Weather Station E Page Contents Display of the indoor temperature and humidity General information and functionsDisplay of the wind speed Display of the amount of rainfall in mm, l/m2 or inch forWeather Wiz Kid display Moon phase displayDisplay of the change / trend in air pressure Quick overview of the main display fields Preparation for operation Commissioning 93019305 Base unitSetting up/Wall mounting OperationCalling up configuration mode Setting the date and timeSetting the status of the daylight saving time Entering latitude and longitudeSetting the time zone Entering the rain sensor calibration value Setting the unit for rainfall measurementEXITQuit Leaving configuration mode Assigning the indicator path History displaySetting the unit for wind speed Selecting the indoor temperature display Selecting the outdoor temperature displayResetting the total rainfall quantity OperationCalling up MIN/MAX values Calling up minimum valuesCalling up maximum values Deleting MIN/MAX valuesAdditional functions Moon phase display Outdoor temperature combi-sensor onlyOther display options Wind symbol display wind sock Wiz KidComfort indicator Changing batteries Base stationPlease dispose of dead batteries properly Instant rain displayTroubleshooting Transmitter batteries are dischargedRange Maintenance and servicing informationCleaning the rainfall sensor Attach Turn to the right Rainfall sensor correctly installed Calibrating the rain sensor Explanation of terms Technical dataPerceived temperature see Wind chill Calm Intended usage, exclusion of liability, safety instructions FCC InformationPage Appendix a Table of latitude/longitude for US counties State County LatitudePage Page Ware County Page Page Page Page Page Page Page Page Page Page Page Page Page Page Time Zone Major Cities Symbol Difference From UTC Appendix B Table of time zone difference from UTCAppendix C Service and Warrenty information P3 International Corporation Limited WarrantyTel
Related manuals
Manual 48 pages 1.55 Kb

E 9300 specifications

The P3 International E 9300 is an innovative energy monitoring device designed to help users take control of their energy consumption while promoting sustainable practices. This compact and user-friendly device caters to both residential and small commercial environments, making it an indispensable tool for anyone looking to reduce energy costs and environmental impact.

One of the standout features of the P3 International E 9300 is its ability to provide real-time energy usage data. The device tracks and displays information on the electricity consumption of connected appliances, enabling users to identify energy-hogging devices and make informed decisions about their usage. The large, easy-to-read LCD screen showcases important details such as voltage, wattage, amp draw, and kilowatt-hour readings, presenting a comprehensive picture of energy usage at a glance.

Incorporating advanced technologies, the P3 International E 9300 utilizes accurate sensors to ensure precise measurements. This reliability is essential for users striving to monitor their energy consumption closely. The device also features a programmable timer, which allows users to set specific intervals for appliances to be powered on or off, further maximizing energy savings. This feature is particularly beneficial for items like lights and heaters that can be managed to reduce unnecessary energy use during off-peak hours.

Another notable characteristic of the E 9300 is its plug-and-play design, which simplifies the setup process. Users can effortlessly connect the device to a standard outlet and begin monitoring their energy consumption immediately. The compact design ensures it doesn't occupy excessive space, making it a convenient addition to any area of the home or office.

For those interested in long-term energy savings, the P3 International E 9300 supports energy budgeting through its cumulative energy usage readouts. Users can track their electricity consumption over time and compare it to their set energy budgets, helping them make adjustments as needed.

Overall, the P3 International E 9300 stands out as an essential tool for conscious consumers looking to optimize their energy use. Its insightful features, accurate tracking capabilities, and user-friendly design position it as an asset for achieving greater energy efficiency and contributing to a more sustainable future. With the P3 International E 9300, users gain valuable insights into their energy habits, empowering them to make meaningful change.
Top Page Image Contents