Uniden 310e manual Trouble Shooting, Troublecheck

Page 7

=

TROUBLE SHOOTING

If your PRO 3 JDe is not performing up to your expectations, please try these simple steps. If you still cannot get satisfactory results after reading this manual and fol- lowing the troubleshooting steps, please call your local dealer.

TROUBLECHECK

If you determine that service is necessary contact your local dealer or pack the unit in its original carton. Send it along with a brief, concise description of the problem, your name, address, phone number, and a copy of the original purchase receipt to the address listed in the warranty.

Unit will not turn on. No power

J. Check po'Ner cord and all connections~

2.Check power cord fuse.

3.Check vehicle electrical system.

4.Check battery pack connection.

5.Check if batteries are weak.

Poor reception

Weak transmission

J. Check and adjust Squelch.

2.Check antenna system and

,cable, connectors.

3.Make sure antenna is fully extended.

4.Check operation mode of the radio.

J.Check antenna system and cable, connectors.

2.Make sure antenna is fully extended.

3.Check antenna grounding.

4.Check for corrosion on connectors.

~

Image 7
Contents Unioen@ Introduction Portable USE Channel Display a large LEDdis Battery Low LED Lights whenVolume with Power On/Off Mobile Antenna ConnectorImportant Notice Operating Procedure To ReceiveOperating Procedure To Transmit OperationServicing Your CB SpecificationsTransmitter ReceiverTroublecheck Trouble ShootingUniden8