Uniden MC-4700 manual Specifications, Transmitter

Page 3

SPECIFICATIONS

GENERAL

Channels

Frequency Range

Frequency Control

Frequency Tolerance

Frequency Stability

Operating Temperature Range

Microphone

Input Voltage

Current Drain

Cabinet Dimensions (mm)

Weight

Antenna Connector

Meter

Indicators

TRANSMITTER

Power output

Modulation

Intermodulation Distortion

SSB Carrier Suppression Unwanted Sideband

Frequency Response

Output Impedance

SSB Filter

Output Indicators

10 AM, 10 USB

27.680 to 27.980 MHz

Phase Locked Loop(PLL) synthesized circuitry :1:0.005% 0.001 %

-20°C to +50°C

Plug-in type, dynamic with push-to-talk switch and coiled cord

13.8V DC nominal, 15.9V max., 11.7V min. (positive or negative ground).

Transmit: AM full mod., 2.2A; SSB 12 watts PEP output, 2A.

Receiver: AM & SSB with maximum audio

output, 0.6A.

185(W) x 231(D) x 58(H)

3.3Lbs (1.52 kg) UHF, SO-239

Illuminated; indicates relative power output and received signal strength, green receive LED.

LED display; channel, channel 88, TX/RX and AM/SSB.

AM,4 watts

SSB, 12 watts, P.E.P. AM, high and Iow level

SSB: 3rd and 5th order, better than -25 dB. 7th and 9th order, better than -35 dB.

Better than -55 dB Better than -50 dB

AM and SSB: 350 to 2500 Hz.

52 ohms, unbalanced

10.695 MHz, 8 pole monolithic type

6 dB @4.2 kHz

60 dB @7.0 kHz

Meter shows relative RF output power; 'red transmit LED.

-2-

Image 3
Contents Page Radio Back Panel View Transmitter SpecificationsReceiver IntroductionPA System Channel Information FeaturesINSTAllATION Antenna General Information Ground ConnectionOperating Instructions AC OperationRemote Speaker Uniden Indicator Function PUSH-TO-TALK Microphone TransmitoperatingprocedureMaintenance and Adjustment Receive Operating ProcedureUniden@ Months Full Warranty