Uniden UH012 manual Programming the Instant Priority Channel, Recalling the Instant Channel

Page 8

UNIDEN Model UH-012 CB Radio

Operation

Programming the Instant Priority Channel

Turn the Rotary Channel Selector to select the Priority Channel you prefer.

Press and hold for 2 seconds to store the new setting.

Recalling the Instant Channel

Momentarily press at any time to return to the Instant Channel.

UH012

A S C Technology

Advanced Signal Clarity

TX SCAN DUP

Maintenance

Preventive Maintenance: The following system checks should be made every six to twelve months: Check the Standing Wave Ratio(SWR)

Inspect the tightness of all electrical connections.

Inspect the antenna coaxial cable for wear or breaks on the shielding

Inspect the tightness of all screws and other mounting hardware.

Troubleshooting: Should the unit malfunction or perform poorly, follow these procedures; If the transceiver is completely inoperative…

Check the power cord and fuse.

If there is trouble with receiving…

Check the VOLUME control setting. Be sure the SQUELCH is adjusted properly. Possibly the radio is over squelched.

If there is trouble with transmitting…

Check that the transmission line (coaxial cable) is securely connected to the ANTENNA connector.

Check that the antenna is fully extended for proper operation.

Check that all transmission line (coaxial cable) connections are secure and free of corrosion.

Memory Backup: A built-in capacitor protects the channels stored in the UH012 memory after the DC power cable is disconnected.

7

Image 8
Contents Uniden Model UH-012 CB Radio Contents Controls / Connections / Indicators Included with your UH-012 Setting the FM Squelch OperationTransmitting Using Repeater ChannelsSelecting a Channel Scanning open scan Operating the UH-012 in Duplex ModeOpen Scan OS Mode Programming the Instant Priority Channel Recalling the Instant ChannelFrequency Lists Warranty ONE Year Limited WarrantySpecifications UTZZ01882ZZ