Uniden UH012 manual Operation, Setting the FM Squelch

Page 5

UNIDEN Model UH-012 CB Radio

Operation

Setting the FM Squelch

Turn the unit ON by rotating the volume control clockwise. Turn the outer ring of the control to adjust the Squelch.

You must select a channel which is not in use before setting the SQUELCH control. (see p.7)

UH012

A S C Technology

Advanced Signal Clarity

TX SCAN DUP

Think of the squelch control as a gate. If you turn the squelch fully clockwise it raises the ‘Squelch Gate’ so high that no signals get through.

If you turn Squelch fully counterclockwise it lowers the ‘Squelch Gate’ to the extent that all signals get through – weak, medium and strong signals and noise.

To set the ‘Squelch Gate’ to the desired level, turn the squelch knob counterclockwise until you hear noise. Then carefully turn the Squelch knob clockwise until the noise fades. Now only strong signals get through.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Uniden Model UH-012 CB Radio Contents Controls / Connections / Indicators Included with your UH-012 Operation Setting the FM SquelchTransmitting Using Repeater ChannelsSelecting a Channel Scanning open scan Operating the UH-012 in Duplex ModeOpen Scan OS Mode Recalling the Instant Channel Programming the Instant Priority ChannelFrequency Lists ONE Year Limited Warranty WarrantySpecifications UTZZ01882ZZ
Top Page Image Contents