VI. Setting the DAY, DATE, and Year

6.Press the SET button to confirm the minutes and to advance to the Day, Date, and Year setting mode.

Note: In 12h mode, “PM” will appear to the left of the time during PM hours. If the time is not within the PM hours, nothing will be displayed. Be sure to set the time to the correct AM/PM time to ensure automatic reception at optimal times.

1.Press and hold the SET button for 3 seconds, or until “12 h” or “24 h” flashes in the DATE LCD.

2.Press the SET button 5 more times to reach the Weekday setting mode.

Note: “MO” (representing Monday) is the default setting for the weekday, “1.1” is the default setting for the numeric month and day, and “1999” is the default setting for the year. The day, date, and year will be automatically set once the WWVB signal is received. However, the day, date, and year can be manually set and will flash respectively in the DATE LCD during manual programming.

3.The weekday will be flashing in the DATE LCD, press the CH button to change the weekday.

4.Press the SET button to confirm, and to enter the numeric- month setting mode.

5.The numeric-month will be flashing in the DATE LCD. Use the CH button to set to the current month.

6.Press the SET button to confirm the numeric-month, and to enter the numeric-day setting mode.

7.The numeric-day will be flashing, use the CH button to set the current day.

8.Press the SET button to confirm and to enter the year setting mode.

9.The default-year will be flashing, use the CH to set the appropriate year.