La Crosse Technology WT-2160 instruction manual Battery Installation

Page 5

I. BATTERY INSTALLATION

A. The battery is included in the clock with a plastic insulating strip that needs to be removed to activate the clock.

1.Using a coin, turn the battery cover slightly counter-clockwise.

2.Take off the cover; you may need to pry it off using a paperclip or other small object.

3.Remove the plastic from under the battery.

Battery cover

Battery Compartment

B. Install the battery, type LR44, with the positive side facing out. The alarm will sound briefly after installation; do not press any buttons for 10 minutes.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Model WT-2160 Radio-controlled Travel Alarm Clock Table of Contents Open Inventory of ContentsDetailed Setup Guide Quick SetupBattery Installation II. Programming A. Setting the Time About Radio Controlled Time signal, Wwvb Programming includes manual time setting Page Programming Sequence III. Setting the Alarms Page IV. Operating Screens Traveling Alarm 1 Time Alarm 2 TimeTroubleshooting Maintenance and Care Instructions Warranty Information SpecificationsSupport@lacrossetechnology.com
Top Page Image Contents