b)“DST On” will flash. Press the “+” key to toggle between the Daylight Saving Time ON or OFF (for places that do not follow Daylight Saving Time changes). Press the SET key.
c)“Sno” will show at the bottom of the screen, and a number will flash at the top. This is the setting for the length of the alarm snooze. Press the “+” key to advance the length from 0 (no snooze)) to 59 minutes. This sets the time the alarm is silenced after pressing the SNOOZE key while the alarm is sounding. Press the SET key.
d)The hour will now flash. Press the “+” key to advance to the correct hour; be sure to note the correct am/pm setting (“PM” will show for pm setting, nothing for the am setting). Press the SET key.
e)The minutes will now flash. Press the “+” key to advance the minutes. By holding the “+” key, the minutes will advance in five minute increments. Press the SET key.
7