La Crosse Technology WT-5130ER manual Detailed SET-UP Guide, Battery Installation

AC adapter receptacle

DETAILED SET-UP GUIDE

A.BATTERY INSTALLATION

1.REMOTE TEMPERATURE SENSOR

a.Remove the battery cover.

b.Observing the correct polarity, install 2 AA batteries. The batteries will fit tightly (to avoid start-up problems make sure that

they do not spring free during installation).

c.Replace the battery cover.

2.PROJECTION ALARM

a.Remove the battery cover.

b.Observe the correct polarity, and install 2 AA batteries.

c.In addition or instead of inserting batteries, the AC adapter can be used. Simply plug the adapter into the

receptacle on the underneath of the alarm clock and then plug in adapter.

d.Replace the battery cover.

e.The projector will activate and remain on if the alarm clock is plugged in. If only batteries are used, the projector will only be activated when a button is pressed. The projection is a red light, not harmful under normal usage, although care should be taken to not look directly into the light.

6