following stored maximum and minimum weather data can be viewed by pressing the MIN/MAX key in normal display mode.
1.Min outdoor temperature with the date and time of recording
Time and date of recording
MIN outdoor 
temperature 
value
MIN icon 
2.Max outdoor temperature with the date and time of recording
3.Min dew point temperature with the date and time of recording
Time and date of recording
MIN dew point 
value
MIN icon
4.Max dew point temperature with the date and time of recording
5.Min outdoor humidity with the date and time of recording
6.Max outdoor humidity with the date and time of recording
Time and date of recording
MAX outdoor 
humidity value
MAX icon
92
Time and date of recording
MAX wind gust value
MAX icon
13. Max 24 hour rainfall with the date and time of recording
24h rainfall value
MAX icon 
RESET THE MAXIMUM AND MINIMUM WEATHER DATA
To reset the aforementioned maximum or minimum weather data 1. to 13., you shall need to reset each of the data independently.
1.Press MIN/MAX key to show the desired weather data. For instance, if you want to reset the minimum humidity, in the normal display you shall press the MIN/MAX key three times to show the min humidity value.
2.Press and hold the SET key for about 2 seconds, then the "RESET" icon will appear at the bottom part of the LCD.
3.Press the + key once, then the stored value will be reset to the current value and current time.
4.Press the ALARM key to return to normal display mode.
14.Total rainfall amount
The total rainfall measurement is displayed in the fourth section of the LCD, in the unit of mm or inch. It shows the total rainfall accumulated since last reset of the weather station.
In normal display mode, press the MIN/MAX key fourteen times to show the total rainfall value. The "RESET" icon will also be shown at the same time.
94
7.Min Wind chill temperature with the date and time of recording
Time and date of recording
MIN wind chill value
MIN icon
8.Max Wind chill temperature with the date and time of recording
9.Min Relative pressure with the date and time of recording
10.Max Relative pressure with the date and time of recording
Time and date or recording
MAX relative 
pressure value
MAX icon
11.Maximum wind speed with the date and time of recording
Time and date 
of recording
MAX wind speed value
MAX icon
12.Maximum Gust with the date and time of recording
93
The total rainfall value is 
counted from this time and date
Total rainfall |
|
icon | Total rainfall amount |
|
To reset the rainfall reading, press the + key once when the Rainfall value and "Reset" icon is shown. Then the total rainfall amount will be reset to 0, and the time updated to current time.
Note:
After power up, the time and date and total rainfall are displayed as "- -
SWITCHING ON/OFF THE BUZZER
User may choose to turn off the buzzer so that when the time alarm is switched on and activated, the buzzer will not sound but we can still see the alarm icon (((y))) flashing on the LCD for time alarm.
On the other hand, when the buzzer is turned off and any weather alarm is activated, the particular weather digits will flash to show user that the weather condition is being out of the preset threshold value, yet the buzzer will not sound.
To switch off the buzzer:
1.In normal display mode, press and hold the SET key until the icon "BUZZER OFF" is shown at the right side above the Wind direction scale. The LCD will change to setting mode.
2.Press ALARM key once to return to the normal display mode. The "BUZZER OFF" icon will still be shown.
BUZZER OFF icon
To
1.When the BUZZER OFF icon is shown on LCD, press and hold the SET key until the BUZZER OFF icon disappears.
2.Press ALARM key once to return to the normal display mode. The "BUZZER OFF" icon will no longer be shown. Then the alarm will sound normally.
LOW BATTERY INDICATOR
The low battery indicator of the weather station and the transmitter will be displayed at the top and bottom portion of the LCD respectively when the
95