La Crosse Technology WS-7168U instruction manual Indoor Weather Station

Page 5

DETAILED SET-UP GUIDE

BATTERY INSTALLATION

A. REMOTE TEMPERATURE SENSOR

1.

Remove the mounting bracket. The

 

 

bracket snaps on and off easily.

Battery

2.

Remove the battery cover, by sliding the

Cover

cover down.

3.Observing the correct polarity install 2 AA batteries. The batteries will fit tightly (to avoid start-up problems make sure they do not spring free).

4.Replace the battery cover by sliding upwards. Be sure battery cover is on securely.

B. INDOOR WEATHER STATION

1.Remove the battery cover. To do this, insert a solid object in the space provided at the lower- central position of the battery cover, then push up and pull out on the battery cover.

2.Observe the correct polarity, and install 2 AA batteries.

3.Replace the battery cover.

Battery Cover

Note: Immediately after the batteries have been installed, the LCD (Liquid Crystal Display) will flash. Within 15 seconds the indoor temperature, indoor relative humidity, and the weather icons (sun and clouds) will be displayed. If not, remove batteries for 10 seconds and reinstall. If the outdoor temperature is not displayed within four minutes, remove batteries from both units, wait 30 seconds, and reinstall making sure to install batteries into the remote temperature sensor first. The time will show -:-- and start searching for the WWVB signal. If it successfully receives the time signal (usually at night), it will display the correct time (default time-zone is Eastern). You will need to adjust the time zone to match your local time.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents WS-7168U Table of Contents Inventory of Contents Do not Press ANY Buttons for 15 Minutes Quick SET-UP GuideIndoor Weather Station II. Function Keys Program ModeProgramming Sequence and Default Settings IV. Time Zone Setting III. Setting the LCD ContrastHAW Daylight Saving Time DST SettingVII or 24 Hour Time Setting VI. RADIO-CONTROLLED Time ON/OFF SettingManual Time Setting VIII. Time SettingWwvb Remote Control Time IX. Setting the YEAR, DAY and Month Setting the Snooze XI. Selecting F or C XII. Setting the Forecast Sensitivity Weather Icons Features of the WS-7168UWeather Forecast Weather Tendency Arrows Viewing the Indoor Temperature Records III. Outdoor TemperatureIV. Minimum and Maximum Temperature Records Resetting the Mimimum and Maximum Records Viewing the Outdoor Temperature RecordsSET-UP of Multiple Units Adding Remote Temperature Sensors OptionalMounting Outdoor LCDII. the Indoor Weather Station Mounting with ScrewsMounting with Adhesive Tape Wall Mounting Using the Table StandTroubleshooting Temperature measuring range Maintenance and Care InstructionsSpecifications Dimensions H x W x D Power SupplySupport@lacrossetechnology.com FCC Disclaimer
Top Page Image Contents