La Crosse Technology WS-7168U Program Mode, Programming Sequence and Default Settings

Page 6

PROGRAM MODE

Programming Note: If 30 seconds is allowed to pass, or the CH button is pressed during the programming mode, the unit will confirm/set the last information entered—the display will stop flashing and return to normal time-date readings. If you don’t leave the program mode during the programming of sections IV through XI, you can advance to step 4 of the next program setting. If you do leave the program setting (or want to program a specific setting) follow each instructional step to program that setting.

I.PROGRAMMING SEQUENCE AND DEFAULT SETTINGS

The programming sequence and default (factory) settings are as follows:

LCD Contrast

5

Time Zone

-5 (Eastern)

Daylight Saving Time

1 (on)

Radio-controlled time reception

ON

12/24-hour time

12

Time

12:00

Year

2003

Day and Month

1.1.

Snooze (this function not used)

10

Temperature Format

°F

Forecast Sensitivity

2

Please note that while there is a snooze adjustment in the programming this is an unused function as there is no alarm on the indoor weather station.

II.FUNCTION KEYS

The function keys are located on the front of the unit directly below the LCD.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents WS-7168U Table of Contents Inventory of Contents Quick SET-UP Guide Do not Press ANY Buttons for 15 MinutesIndoor Weather Station Program Mode Programming Sequence and Default SettingsII. Function Keys III. Setting the LCD Contrast IV. Time Zone SettingDaylight Saving Time DST Setting HAWVI. RADIO-CONTROLLED Time ON/OFF Setting VII or 24 Hour Time SettingVIII. Time Setting Wwvb Remote Control TimeManual Time Setting IX. Setting the YEAR, DAY and Month Setting the Snooze XI. Selecting F or C XII. Setting the Forecast Sensitivity Features of the WS-7168U Weather ForecastWeather Icons Weather Tendency Arrows III. Outdoor Temperature IV. Minimum and Maximum Temperature RecordsViewing the Indoor Temperature Records Viewing the Outdoor Temperature Records Resetting the Mimimum and Maximum RecordsAdding Remote Temperature Sensors Optional SET-UP of Multiple UnitsOutdoor LCD MountingMounting with Screws Mounting with Adhesive TapeII. the Indoor Weather Station Using the Table Stand Wall MountingTroubleshooting Maintenance and Care Instructions SpecificationsTemperature measuring range Power Supply Dimensions H x W x DSupport@lacrossetechnology.com FCC Disclaimer
Top Page Image Contents