CONNECTIONS
External Audio System
Connect the stereo connection cable (not included) into the LINE OUT jack of the unit and the CD/AUX of the audio system. ( Do not connect it to the amplifier phono jack.)
Note: Always switch off the power before making any connections between the CD player and other audio system.
•If the CD player interferes with the TV or radio reception, move the CD player away from the TV set or radio receiver.
HEADPHONES
Connect the stereo headphones (included) to the Phones jack .
CD PLAYBACK
1.Connect the included headphones into the Phones jack.
2.Slide the Door Open switch to open the CD compar tment door.
3.Insert a disc with the label side facing up.
4.Close the CD compartment door until a click is heard.
5.Set the VOLUME control to minimum.
6.Press the PLAY/PAUSE ( 
) button , the unit power will turn on automatically and starts playback. The total number of tracks and playing time appears on the display. During playback, the track number and the elapsed playing time will be displayed.
7.Adjust the VOLUME control to your desired listening level.
8.To stop playback temporarily, press the PLAY/PAUSE ( 
) button once. The elapsed time and track number will flash on the display. Press the PLAY/PAUSE ( 
) button again to resume playback.
9.To stop playback, press the STOP( 
) button once.
10.To turn the unit off, press the STOP( 
) twice.
Notes:
•When the CD door is accidentally opened during playback, " - - " will appear on the display.
•Wait until the disc is fully stopped before pressing the OPEN button.
•This unit can play 3" (8cm) single CDs without an adaptor.
EN - 5
LOCATING APARTICULAR TRACK OR POINTOFTHE TRACK
1.Press the SKIP ( 
) button once to go back to the beginning of the current track.
2.Press the SKIP (
) button repeatedly to go back to previous tracks.
3.Press the SKIP (
) button repeatedly to go to next tracks.
4.Press and hold either SKIP(
) or SKIP( 
) bu tton to search backwards or
forwards, at high speed, a particular point of track.
Note: Low level audio will be heard during the search process to assist in locating the correct point in the track.
REPEAT PLAYBACK
1. To re pea t the same tr ack, pre ss th e CD Mod e b utton o nce. The indicator
( | ) will appear on the display. |
2.Press the PLAY/PAUSE ( 
)button, the player starts single repeat playback until STOP button is pressed.
3.To repeat the entire CD, press the MODE button twice during playback.
The indicator (
) will appear on the display, and all tracks will be repeated.
4.To cancel the repeat mode, simply press the STOP button. The indicator disappears from the display.
INTRO PLAY
1.Press the MODE button 3 times to enter the Intro mode, 'INTRO' flashes on the display.
2.Press the PLAY/PAUSE( 
) button, CD will play the first 10 seconds of each track on the CD.
3.Press MODE button once to cancel Intro playback and resume normal playback.
4.Power is turned off automatically after 60 seconds, when all tracks have been played.
RANDOMPLAY
1.Press the RANDOM button once, 'RAND' appears on the display.
2.Press the PLAY/PAUSE( 
) button and the CD will start playback in randomly order.
3.Press SKIP button to go to next Random track.
Note: If the Random mode is selected during the playback, the function will commence once the curr ent track is ended.
4.Press the RANDOM button once to return to the Normal Playback mode.
EN - 6