Read these instructions carefully before using this product, and retain them in a safe place for reference.
Features
Top
1 | Handle | 5 | Function (RADIO/CD/AUX) |
2 | CD door | 6 | Power (ON/OFF) |
3 | Volume control | 7 | Tuning control |
4 | FM antenna | 8 | CD door open (push tab) |
Back
1.5V x 8 UM 2 or |
|
|
|
|
|
+ | - | + | - | ||
“C” size or LR14 |
|
|
|
|
|
- | + |
| - | + | |
|
|
|
|
|
|
| + | - | + | - | |
|
|
|
|
|
|
| - | + |
| - | + |
1AUX IN jack
2Battery compartment
3 AC input
Front
1 | Speaker | 8 | Speaker |
2 | CD play/pause button | 9 | Time set button |
3 | CD stop button | 10 | Display button |
4 | CD skip next button | 11 | Repeat button |
5 | CD track display | 12 | Random button |
6 | CD skip previous button | 13 | Standby button |
7 | AM/FM button |
|
|
Setting up your CD player
Connecting AC power
1Connect the provided AC power cord to the AC input socket on the CD player.
2Plug the cord into a household AC power socket.
Installing batteries
1Insert eight C alkaline batteries (not included) into the battery compartment as indicated by the diagram within the compartment.
2Securely close the battery compartment cover.
Notes: Battery power is used only when AC power is disconnected. Replace all batteries at the same time with the same battery type. Do not mix battery types.
When CD player is stored unused for a long time, remove the batteries to prevent damage.
Quick Installation Guide
NS-B4111 CD Boombox
Setting the clock
1 Turn off your CD player, then press TIME SET. The hour digits flash. Set time under Standby mode.
2 Press 
or 
to adjust the hour, then press TIME SET. The minute digits flash.
3 Press 
or 
to adjust the minute, then press TIME SET. The clock is set.
4 To view the clock, turn on your CD player, then press DISPLAY.
NOTE: While the boombox is in standby mode running on battery power, your batteries will continue to slowly drain, although the clock’s time will be saved. To prevent battery drain, turn the boombox completely off by sliding the power switch (although your clock setting will be lost).
Using your CD player
Warning: Use of any controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure.
Using the radio
1Slide the FUNCTION selector to RADIO, then press AM/FM to select AM or FM mode.
2Turn the TUNING control until you locate the station you want. If you tune to an FM station broadcasting in stereo, the stereo indicator turns on.“ST” will appear in the
•For optimum FM reception, make sure that the FM (telescopic) antenna is fully extended and vertical.
•For optimum AM reception, rotate the CD player to orient its
Using the CD player
The CD player can play standard audio CDs and audio CDs created on a computer’s
1Slide the FUNCTION selector to CD, then lift the CD door and insert a CD with the label facing up. Make sure that the CD is correctly mounted on the spindle and locked in place.
3/4/20093/4/2009 7:57:127:57:12 PMPM