Insignia NS-B4111 Maintaining your CDs, Specifications, Listening to an external audio source

2Close the CD door. After a few seconds, the display shows the total number of tracks on the CD. If the disc is not correctly inserted or defective, the display shows .

To play the CD	Press PLAY/PAUSE. The current track number is
	shown on the display.
To pause	Press PLAY/PAUSE.The play indicator flashes on the
playback	display.PressPLAY/PAUSEagaintoresumeplayback.
To stop playback	Press STOP.The display shows the total number of

Safety information

Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

This apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Specifications

be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

17 The power plug is used as the disconnect device and should remain readily accessible during the device’s intended use. To completely disconnect the device from power, you should disconnect the power plug from the AC power outlet.

18The battery should not be exposed to excessive heat, such as direct sunlight, fire, or the like.

19Cautions and other markings are located at the bottom of the apparatus.

20The marking information is located at the bottom of apparatus.

	tracks on the CD.
To skip tracks	Press	or	.
To repeat the	PressREPEAT.Torepeattheentiredisc(continuous
current track	play), press REPEAT twice. To return to normal
	play, press REPEAT until“REPEAT” disappears from
	the display.
To play tracks in PressSTOP,pressRANDOM,thenpressPLAY/PAUSE.

The lightning flash with arrowhead symbol, within an equilateral triangle , is intended to alert the user to the presence of unisulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitudetoconstitutearisk of electric shock to people.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(ORBACK).NOUSER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangleisintendedtoalert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Caution: The use of any controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure.

Legal notices

random order To stop random playback, press RANDOM again.

Listening to an external audio source

1Connect the external audio device to the AUX IN jack on the

back panel of your CD player.

2 Slide the FUNCTION selector on your CD player to AUX.

3 Start playing music from your external audio device. Audio plays through your CD player’s speakers.

Maintaining your CDs

•Handle CDs only by their edges. Never allow your fingers to contact the reflective, unprinted side of the CD.

•Do not attach things such as adhesive tape and stickers to your audio CDs.

•Periodically clean your CDs with a soft, lint-free, dry cloth. Never use detergents or adhesive cleaners to clean the disc. If necessary, use a CD cleaning kit.

•If the CD skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).

•When cleaning CDs, wipe in straight lines from the center of the CD to the outside edge. Never wipe in circular motions.

Specifications

Power	AC: AC120V ~ 60Hz
	Batteries: DC 12V (8 C batteries)
Radio frequency	FM: 87.5~108 MHz
coverage	AM (MW): 520~1730 KHz
GENERAL	Speaker: 8 ohms
CD PLAYER	PickUp:3-beam,semiconductorlaser,1-bitDAconverter
	Encoding: 8-time oversampling
2

IMPORTANT SAFETY INSTRUCTIONS

1Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11Only use attachments/accessories specified by the manufacturer.

12Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13Unplugthisapparatusduringlightningstormsorwhenunusedforlongperiodsoftime.

14Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15Grounding or Polarization - This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

Alternate Warnings - This product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

16Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never

FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced technician for help.

FCC warning

Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.

Energy Star®

As an Energy Star Partner, Insignia has determined that his product or product models meet the Energy Star guidelines for energy efficiency.

Canada ICES-003 statement

This Class B digital apparatus complies with Canadian ICES-003.

90-day limited warranty

Visit www.insigniaproducts.com for details.

© 2009 Best Buy Enterprise Services, Inc. All rights reserved.

ENGLISH 09-0103

NS-B4111_09-0103_QSG_V2_EN.indd 2

3/4/20093/4/2009 7:57:147:57:14 PMPM