JVC TV 13140 operating instructions Precautions, Moisture Condensation, To USE AC Power Source

PRECAUTIONS

MOISTURE	CONDENSATION
DO NOT OPERATE ANy FUNCTIONS ON THIS UNIT FOR AT LEAST _		OR

THREE HOURS WHEN MOISTURE IN THE AIR CONDENSES ON I1: LET THE

UNIT STAND WITH POWER ON (SEE BELOW),

•WHAT IS MOISTURE CONDENSATION?

When a cold liquid is poured into a glass, for exammple,water vapor in the air will condense on the surface of the _less. This is called moisture cOndensation.

Head Drum

•MOIETURE WiLL CONDENSE ON THE UNIT IN THE FOLLOWING CASES;

•When you move the unit from a cold to a warm place.

•After heating a cold room or under extremely humid conditions.

•WHEN YOU EXPERIENCE THE ABOVE CONDITIONS,

Plug the power cord into an AC outlet, set the POWER switch to ON and leave the

unit at tcom temperature until moisture condensation disappears, Depending on the surrounding conditions, this may take two or three hours.

Vkl_ _pe

• If you cause a static discharge when touching the _		Avoid extreme heat.
unit, and the unit fails to function, simply unplug the
unit from the wall ouitet, wait a few minutes, and
p;ug it beck in. The unit should return to normal
operation.	_t

--De not insert fingers or any other objects into the cas_etta laading SlOLDo not spray cleaner or w_x directly on the unit or use forced air to remove dust.

f_Keep the unit away from flower vases, sinks, etc. If tiquids should be spilled into the unff, serous damage will result. If you spill any liquids into the unit, unplug the AC power cord immediately and cortsultqualified service personnel before attempting

to use it again. .._

When you leave your home for a long time, unplug the AC power cord.

OK

_Avoid places subject to strong vibration. Use in a 1 horizontet (flat) I_ition only.

f1 rWhen you finish operating the unit, always unload

the cassette and turn off the power.

rTo protect the unit from a lightn_g storm, unpfug th_

AC power cord from the wall outlet and diSconneCt the antenna.

_De not place the unit on or near appliances which	rAvold extreme cold.	•
may cause elecbomagnetic interference (e.g.
speakers, etc), 0oicg so may cauee erratic operatiol
of the unit includingpicture and/_r soL_nddistoriio_ or
noise.

E

POWER SOURCE

TO USE AC POWER SOURCE

Use the AC pol_Ldzed line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz poledzed AC outlet.

"-Avoidextreme moisture and dust,

!

.

The ventilation holes prevent overheating. Do not

block or cover these holes. Especially avoid Jcovering the hotes wi_ soft materials such as cloth

WIDER HOLE

AND BLADE

PolarizedAC Cord

(One bladeis widerthan the other.)

NOTE:

1.Never connect the AC line cord plug to other than the specified voltage (120V 60Rz). Use the attached power cord only.

2.If the pelerized AC cord does not fit into a non-polarfzed AC outlet, do not attempt to file or cut the blade, it is the user's responsibility to have an electrician replace the obsolete ouheL

3.If you cause a static discharge when touching the unit, and the unit fails to function, simply unplug the unit, from the AC outlet, wait an hour, and plug it back in. The unit should rotum to ncrmal operation.

= 6 7