JVC TV 13140 Loading and Unloading a Video Cassette, To Start Playback, To Record Again

LOADING AND UNLOADING A VIDEO CASSETTE

Use only video cassette tapes marked _ and S_.

LOADING

Push the center of the tape until it is automatically retractsd into the TVNCR.

AUTOMA'RC POWER ON AND PLAY

When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically and p_aybackwill start immediately.

Insert the cassette with its labeled side facing you.

An inverted video cassette cannot be inserted.

UNLOADING

Pull the cassette out.

_1 EJECTo unloadbuttona videoon thecassette,TVNCRpresstwicethe. TheSTOP/first mr..iD! press will stopthe tape in any mode. "me second press wiJI eject the tape.

S_Op/EJECt"

PLAYBACK

To play a prerecordedtape.

TO START PLAYBACK

Totorn ontheTVNCR, pressthe POWERbutton,

cassetteprerecordedLoad tape withouttapethe. erase(Whenpreventionloading a tat playback will start automaticaity.)

AUTOMATIC EJECT

If the TVNCR automatically rewinds thetapeto the beginning (AUTO REWIND FEATURE), the tape will be ejected automatically. (See NOTE on page 34.)

TO PREVENT ACCIDENTAL ERASURE

rafter recording, break off the erase prevention tab if you do not wish to record over the tape.

NOTE: • Always eject the tape when not in use.

•The cassette tape can be ejected even if the POWER is "OFF".

TO RECORD AGAIN

Cover tbe hole with vinyl tape.

Be careful the tape does not extend past the edges of the video cassette housing.

TO	STOP PLAYBACK
Press the PLAY buifon th beg_ playt_d_	press the STOP button once. The ta
	remain fully loaded and ready to play.
=I_ "wiUabpear _ _,_eso'cert.

								%
TAPE	SPEED AND	MAXIMUM	RECORDING		TIME
_r					VIDEO CASE3"FE TAPE
		%160		T-120	T-90		T-60	T-30
								NOTE: This TV/VCR selects the tape speed SP or EP automatically.
SP (Standard Play)		2-2/3 hours		2 hours	1-1/2	hours	1 hour	30 minutes
LEP	(Extended Play)	8 hours		6 hours	4-1/2	hours	3 houm	1-1/2 hours

28 29