Toshiba MA-1595-1 Series Is selected, When the feature PLU to be inquired is selected, 72 @/FOR

7. DEPARTMENT AND PLU MAINTENANCE EO1-11152

7.2 Department Preset Price Setting or Changing with DLL (Submode 72)

Deletion
CONDITION	The sales data of the required PLUs are zero and all terminals are outside a sale,
	programming, or report taking operations. (when the feature “PLU not to be inquired”
	is selected.)
	The sale data of the required PLUs are zero and any time outside a sale for Master.
	(when the feature “PLU to be inquired” is selected)
OPERATION	Mode Lock: SET and IN-LINE Lamp illuminated

63 [@/FOR] [ITEM CORR] PLU code [PLU] [ST]

[AT/TL]

Repeatable for other PLUs to be deleted.

NOTES: 1. Up to 100 PLUs can be added/changed/deleted once.

2.The DLL is possible while a sales transaction is being performed in the Satellite Terminal.

7.2Department Preset Price Setting or Changing with DLL (Submode 72)

This submode is used to newly set or change a preset price to required departments, and loads the price data into Satellite Terminals.

CONDITION

OPERATION

72[@/FOR]

Any time outside a sale

Mode Lock: SET and IN-LINE Lamp illuminated

New Preset Price [DEPT]

Max. 6 digits; 0 to 999999 (Department Preset Code Key) (result: $0.00 to $9999.99)

Dept. Code [DP#]	New Preset Price [#]
Max. 2 digits; 1 to 99	Max. 6 digits; 0 to 999999
*	(result: $0.00 to $9999.99)

[AT/TL]

Repeatable for other departments	* For sequentially programming the department,
	the Dept Code specification can be skipped.

NOTES: 1. When the [AT/TL] key is depressed in the above operation, it sends a DLL-start command to the designated terminals, makes the terminals HOLD condition, and executes DLL. After DLL is completed, it sends a DLL-end command to each terminal and releases the HOLD condition.

2.When zero is entered as the New Preset Price value, the department is set with a zero price. When the new Preset Price entry is skipped and the [DEPT] or [#] is simply depressed, it will be an open-price department.

7- 3