Toshiba MA-1595-1 Series owner manual Functions of Each KEY, Receipt, Dept

9. FUNCTIONS OF EACH KEY EO1-11152

9. FUNCTIONS OF EACH KEY

9. FUNCTIONS OF EACH KEY

This section briefly describes functions of each key for your quick reference purposes. See the reference pages in Section 10: REGISTERING PROCEDURE AND PRINT FORMAT for detail operation sequences.

						TABLE OF KEY FUNCTIONS
			Key			Functions	Reference
							page
						LOG key	7-1
			LOG			Used in case of Cashier Code Entry Method, to declare start or end
						of normal operation by cashier. For details, refer to Section 7.1.
						Receipt key	10-2
		RECEIPT				Used to change the receipt-ON/OFF mode.
			LOG			Log/Receipt Key	See pages for
						This is a dual-function key that has both [LOG] and [RECEIPT]	[LOG] and
		RECEIPT
						functions.	[RECEIPT]
		RECEIPT				Receipt Post-Issue Key	10-38
						Used to issue the receipt of a sale when the sale has already
		ISSUE
						finalized in the Receipt-OFF mode.
						Receipt Feed Key	-----
				RF		Used to advance the receipt roll and operated by holding it down
						until the paper has advanced to the required position.
						Journal Feed Key	-----
				JF		Used to advance the journal roll in the same fashion as the [RF]
						key is used to receipt roll.
						Numeric Keys	-----
	7			8	9	Used to enter numeric values. Depressing the [00] key once is the
	4			5	6	same as depressing the [0] key twice consecutively. Depressing
	1			2	3	the [000] key once is the same as depressing the [0] key three
		0		00	•	times consecutively. The [ . ] key is used to designate the decimal
						point of a percentage rate or a quantity.
						Department Keys	10-4
1				to	60	Used to enter each item, serving for classifying merchandise by
						department.
						Department No. key	See pages for
				DP#		Used to access a department by designating the department code,	[DEPT]
						instead of depressing the specific Department key. With this key
						installed, a maximum of 99 departments may be controlled.

	PLU (Price Look Up) Key	10-5
PLU	Used to enter a PLU that is linked to a department.
	Clear Key	-----
C	Used to clear numeric entries or a declaration key entry.
	Non-add Number Print Key	10-20

#Used to print a non-add number (such as Customer No., Credit Card No., etc.) on the receipt and journal for future reference.

	No-sale Key	10-2, 3
NS	Used to open the cash drawer without relating a sale, and also used

to display the store message.

9- 1