Toshiba MA-1595-1 Series owner manual Sub-Link PLU Entry, Urgent PLU Maintenance

10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11152

10.20 Sub-Link PLU Entry

10.20 Sub-Link PLU Entry

OPERATION

Head-link PLU Entry

When the Sub-link PLU is of Preset-PLU Type:

Sub-link PLU Code Entry - - -

(automatically entered)

When the Sub-link PLU is of Open-PLU Type:

Price [AMT] - - -

(compulsory) 'ULQN6PDOO6PDOO--￿Receipt%WO'HSR￿%Print Format --7

Example) PLU “Drink Small-B” is programmed as Head-link PLU and PLU “Small-Btl Depo” is programmed as Sub-link in this example.

−￿￿￿￿￿

NOTES: 1. For entering a Price of the Sub-link PLU, the [PLU Preset-code Key] cannot be used (always use the [AMT] key in this case).

2.When the program option “Manager Intervention for entering Negative Departments/PLUs in REG mode” has been selected, a Manager Intervention is required for the Head-link PLU entry of which Sub-link PLU is programmed as negative status.

10.21Urgent PLU Maintenance

(to enter a PLU item not existing in the PLU program file)

OPERATION
		Error Message	Depress [C]
PLU Entry Operation		“CODE ERROR”	to cancel the
		is displayed.	error status.
	[PLU ADD]	(Quantity [@/FOR])	PLU Code [PLU]
		in case of quantity extension
			Or, scan the barcode.

[DEPT]

Dept Code [DP#]

Link Department Designation

Unit Price [AMT] - - -

Max. 6 digits (0 to 999999)

NOTES: 1. When a PLU item is successfully entered in the operation procedure above, the item is printed on the receipt and journal. The item name at this time is the name of the Link Department. At the same time, the PLU item is automatically added to the PLU ADDITIONAL FILE. Thus, the added PLU item can now be entered normally on any of the terminals.

2.Since PLU items thus added to the PLU file are programmed with the name of the link department and the “zero” status as a provisional measure, it will be a Manager’s job to change those PLU tables with proper name and status as a PLU maintenance operation later (described in the Manager’s Guide).

10-16