Toshiba MA-1595-1 Series owner manual PLU Table Programming Contents, Off

6. PROGRAMMING OPERATIONS EO1-11152

6.6 PLU Table Programming (Submode 4)

PLU TABLE PROGRAMMING CONTENTS (continued)

Address No. Description of Programming Contents

4Status Code 1 Selection

•Enter Codes 1 to 7 whose status must be set to ON side. More than one code may be entered. Enter 0 when none of the statuses should be set to ON.

Code	Item	Selective Status
		ON	OFF
1	Quantity Entry	Compulsory	Optional
2	Net to Selective Itemizer 1	Yes	No
3	Net to Selective Itemizer 2	Yes	No
4	Food Stamp Status	Yes	No
5	Scale Entry	Compulsory	Prohibited
6	HI-CONE Status	Yes	No
7	Lock or Unlock Status	Lock (not in use)	Unlock (in use)
8	Delete Status	Yes	No

NOTES:

Code 1: Quantity Entry Compulsion

•When this status is selected, the quantity entry is always necessary for PLU item entry. Code 2,3: Net to Selective Itemizer 1, 2

•Refer to Section 6.21 Preset Rate Setting for Selective Itemizers.

Code 5: Scale Entry

•This status and the HI-CONE Status (Code 6) cannot be combined for one PLU.

•The Scale Entry status is unavailable for the Age Limit 1 and 2 (Codes 6 and 7 in status 2 selection).

Code 6: HI-CONE Status

•This status requires setting of the Whole Package Quantity (Address 8). Code 7: Lock Status

•When this status is set to a PLU, an entry of the PLU in a sale is prohibited. Code 8: Delete Status

•This status can be set only to a PLU of sales data 0 in the stand-alone system with PLU expansion memory or the M/S system with “PLU to be inquired” feature. When this status is set to a PLU, an entry of the PLU in a sale is not allowed. PLU which has the this status is deleted from the PLU Table File when the PLU Merge is executed.

•This status set is possible only when the PLU center file is selected.

Setting Examples:

To set only Status 2 to ON …........... Enter 2 [#]

To set Statuses 2, 3, 5 to ON …....... Enter 235 [#]

To set none of statuses to ON …..... Enter 0 [#]

6-15