Toshiba MA-1595-1 Series owner manual Error Messages in any mode except Lock

5. DISPLAY EO1-11152

5.1 Upper Row (16-digit dot windows)

(3) Error Messages (in any mode except “LOCK”)

When an error occurs, an error message (programmable) is displayed, with an error buzzer generated (a long tone).

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

XXXXXXXXXXXXXXXX

Error Message (max. 16)

Read the Error Message, depress the [C] key to cancel the error status and tone, operate the sequence again after removing the cause of the error.

The following table shows the cause of the error.

If the error status cannot be cancelled or an error message not listed in the table below is displayed, please contact your nearest TOSHIBA TEC representative.

	ERROR MESSAGE TABLE
Error Message	Cause of the Error
(Standard Setting)
OPERATION ERROR	Key Sequence or Operation Procedure Error
MANAGER REQUIRED	The operation requires a Manager Intervention.
CLOSE DRAWER	The drawer must be closed before the operation.
COMPULSORY CODE	No code has been entered where it is compulsory.
COMP DEPOSIT	Sub-link Department is compulsory, but not yet entered.
SCALE REQUIRED	The [SCALE] key has not been depressed where required.
SCALE OUT	The scale is malfunctioning.
PC COMM ERROR	File Receive Error (when a PC is connected).
CODE ERROR	An undefined code has been entered, or the entered code has already been
	defined.
PROGRAM ERROR	An additional entry of new PLU or new customer file is not acceptable,
	because the memory of each table is full.
CALL MANAGER	The card is not acceptable as a result of Negative Card checking.
DRAWER LIMIT	A media pick up operation is now required.
LINK PLU ERROR	PLU linkage error such as when a sub-link PLU is not programmed in the Link-
	PLU Table.
COMPULSORY SLIP	The operation requires a endorsement print.
CDV ERROR	Check Digit Value Error
COMP CHECK NO.	Performing the negative card check is necessary before finalizing a sale by a
	media key which has the compulsory status of the negative card check.
X/Z IN PROGRESS	Read/Reset operation is unavailable during the consolidation of the
	communication buffer by PC (or master terminal).
ALREADY RESERVED	Read/Reset/Reserve operation was attempted when reset data remained in
	the communication buffer. (in case of the program option to prohibit rewriting
	reset data in the communication buffer)
UNDER AGE	Underage person has attempted to buy cigarette or alcoholic beverage.
COMP QUANTITY	Quantity Entry Compulsion Error (when this compulsion status is programmed
	to a PLU item).
PIN ERROR	EFT Pin Pad Error
NO RESPONS	Time-out condition on the EFT terminal
RECEIPT REQUIRED	Entry of new sale transaction is attempted before issuing the store receipt.
RESPONS NG	Communication error between the ECR and the EFT terminal.
MISC ERROR	Other errors
PAPER END	Paper is out.

5- 3