Toshiba MA-1595-1 Series Time Setting or Adjustment Submode, Combining Methods 1, 2, 1 5 AT/TL

6. PROGRAMMING OPERATIONS EO1-11152

6.7 Time Setting or Adjustment (Submode 5)

3. Using Bar codes (source-marking EAN or UPC bar codes)

If most of the sale items in the store are printed with a source-marking UPC bar codes, the code (the human- readable numerics attached to the bar code print) may be entered as it is. Some items are printed with 13-digit code, and others with 8-digit code. Thus this method is possible only when the option “PLU Code max. 13 digits” is selected.

The merit of this system is that you can simply read and enter the source-marked code rather than generating an original code for each PLU item. If the barcode No. is used, however, it is recommended to adopt the “Scanning System Type”.

4. Combining Methods 1, 2, and 3

When the option “PLU Code max. 13 digits” is selected, some combinations of the above three methods are possible.

Example 1) Combining Methods 1 and 2: x x x x x x

Type IDs described in Method 2

Linked Department Code described in Method 1

Example 2) Combining Methods 3, and Method 1 or 2:

For source-marked items .…use the bar codes.

For other items .……………generate codes in Method 1 or Method 2, in max. 6 or 7 digits for

example.

After all, the methods described above are only suggestions. You may freely make up your own PLU coding method to suit each store’s merchandise controls.

6.7Time Setting or Adjustment (Submode 5)

CONDITION	Anytime outside a sale
OPERATION	Mode Lock: SET
5 [X]		Hour	Minute	[AT/TL]		3($&+'5,9(
		(00 to 23)	(00 to 59)			2SHQ￿￿￿￿3+21(￿￿￿DPWR￿￿￿￿￿￿￿￿￿SP
NOTE: If an hour value of more than 23 or a minute value of more than 59 is					entered, the current data will not
be changed by setting or adjusting the time.						&ORVHG￿HYHU\:HGQHVGD\
Example) To set time “1:15 p.m. (13:15)”.						￿￿￿￿￿￿￿￿￿￿)5,￿￿
Key Operation: Mode Lock: SET, Enter 5 and depress the [X] key.						7(&6725(
[1] [3] [1] [5] [AT/TL]
						3￿￿￿￿￿￿￿￿￿￿￿70

6-24