Toshiba MA-1595-1 Series owner manual Other Operations Required Manager Interventions

2. MANAGER INTERVENTION EO1-11152

2.2 Other Operations Required Manager Interventions

2.2Other Operations Required Manager Interventions

Listing Capacity or Amount Limit Release

Amount Limits may be programmed on Departments/PLUs, Tender Medias, [DOLL DISC], [VND CPN], [STR CPN], [BTL RTN]. These limits are programmed to check an excessively high or low amount entry by cashier’s mistake at the earliest stage. Guide your cashiers as in the following procedure:

(1)During sale entries by the cashier, an error occurs with Error Message “OPERATION ERROR” (programmable) is displayed.

(2)The cashier clears the error by the [C] key. The cashier confirms the amount and operates the item again.

(3)If the same error occurs again, the cashier attempts to enter the amount using the [LC OPEN] or [OPEN] key.

(4)If the operation results in an error again, the Amount Limit cannot be solved by the [LC OPEN] or [OPEN] key.

(5)The cashier calls for Manager Intervention.

The procedure thereafter is the same as Steps 2) to 7) for the ITEMS PROGRAMMED TO REQUIRE MANAGER INTERVENTIONS (Section 2.1).

In need of information of Amount Limits, see the following:

1)Individual Department High and Low Amount Limits (each PLU is restricted by the Amount Limits of its linked department): Ask your TOSHIBA TEC representative.

2)Departments Common High and Low Amount Limits, and High Amount Limits of Tender Media keys: Chapter 7: VERIFICATION OF PROGRAMMED DATA

•FUNCTION KEYS AMOUNT LIMIT READ

3)High Amount Limits for [DOLL DISC], [VND CPN], [STR CPN], and [BTL RTN] keys: Chapter 7: VERIFICATION OF PROGRAMMED DATA

•NEGATIVE AMOUNT KEY AMOUNT LIMIT READ

4)For setting or changing the current Amount Limits, see the following: Chapter 6: PROGRAMMING OPERATIONS

•AMOUNT LIMIT SETTING FOR FUNCTION KEYS (Submode 8)

•NEGATIVE AMOUNT KEY AMOUNT LIMIT SETTING or CHANGING (Submode 35)

2- 3