Toshiba MA-1595-1 Series owner manual Programming Operations Added for In-line Terminals

5. PROGRAMMING OPERATIONS EO1-11152

5.2 Programming Operations Added for In-line Terminals

5.2 Programming Operations Added for In-line Terminals

5.2.1 Terminal Connection Table Setting (Submode 69)

This submode is required for In-line services. The In-line ID No., Register No. and IP Address of each terminal (including the Master Terminal) can be programmed here.

CONDITION	Any time outside a sale
OPERATION	Mode Lock: SET and IN-LINE Lamp illuminated
69 [@/FOR]	In-line ID No. [ST]			Store/Register No. [#]	IP Address [#]		[AT/TL]
	2 digits (01 to 16)			Max. 6 digits	12 digits
	(NOTES 1 & 2 below)		*	0 to 999999	(NOTE 3 below)	* For sequentially
				(NOTE 2 below)		programming In-
						line ID Nos, the In-
						line ID specification
Repeat for other terminals to be connected, including the Master Terminal itself. (Max. 16 terminals)						can be skipped.
NOTES: 1. In-line ID No.:		Master Terminal ... 01 (fixed)
		Backup Master Terminal (if connected) ... 02 (fixed)
		Satellite Terminals ... 03 to 16 (max. 14 terminals)

2.The In-line ID No. and Register No. of each terminal to be set here must be the same as those programmed for the terminal in IN-LINE TERMINAL ID SETTING (Submode 77) in this chapter and STORE/REGISTER NO. SETTING (no submode) in Chapter 6 of the Programming Manual for stand-alone level.

3.IP Address: 12 digits (000.. 000 to 255.. 255)

ex) To set the IP Address 192.168.0.252……….Enter 192168000252

4.To delete an individual terminal from the Terminal Connection Table, enter 0 in place of the In- line ID No., then enter Register No..

69 [@/FOR] 0 [ST] Store/Register No.[#] [AT/TL]

5.To delete the entire Terminal Connection Table once set, operate:

69 [@/FOR] 0 [AT/TL]

6.If a deleting operation (individual or entire deletion) is performed, the files occupied by the deleted terminal(s) (such as Floating Cashier File, etc.) is canceled. Therefore, a deleting operation should be performed only when the system is to be re-built or a terminal is to be detached from the system.

Example)

To set Master Terminal and Satellite Terminal in the Connection

Table (total of two terminals in the in-line system):
Master Terminal		In-line ID No.	1	Register No.	111101
Satellite Terminal		In-line ID No.	3	Register No.	333303
Key Operation: Mode Lock SET and IN-LINE Lamp illuminated,
enter 69, depress [@/FOR].
01 [ST]		(Master In-line ID No.)
111101	[#]	(Master Register No.)
192168000251	[#]	(Master IP Address)
03 [ST]		(Satellite In-line ID No.)
333303	[#]	(Satellite Register No.)
192168000253	[#]	(Satellite IP Address)
[AT/TL]		(Complete this Submode)

IP Address￿￿￿￿￿&ORVHG2SHQ192.7(&6725(￿￿￿￿3+21(￿168HYHU\3(￿.0.251$DP￿￿￿￿￿&+WR:HGQHVGD\'5,9(￿SP

IP Address 192.168.0.253

￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿3681￿￿￿￿￿￿￿￿￿￿￿￿￿70

5- 2