Toshiba MA-1595-1 Series owner manual Hardware Description

3. HARDWARE DESCRIPTION EO1-11152

3.1 Operator Display Indications of Master-Satellite System

3. HARDWARE DESCRIPTION

T3.1 Operator Display Indications of Master-Satellite System

Display Indications during In-line Services

The followings are displayed in the 16-digit dot windows, 10-digit 7-segment window, and IN-LINE Lamp of the Operator Display panel during in-line services.

< Master Terminal >

DPT X

Number of ECRs unserviced

Blink

In-line Job No.

Mode Indication

ECR No. now serviced at the time of collecting read/reset data

(( )) TL ST

Illuminated

•IN-LINE Lamp

1)Illuminated during RTR declaration “ON”

2)Extinguished during RTR declaration “OFF”

3)Blinking during ULL operations

•Mode Indication

5 4 3 2 1

RTR/SET Mode:

RTR/X Mode:

RTR/Z Mode:

P

X

Z

<Satellite Terminals or Backup Master Terminal >

• IN-LINE Lamp

1)Illuminated during “Hold” condition

2)Extinguished after completing in-line services

3)Blinking during in-line services

T

Error Messages

The following table shows the Error Codes and Messages to be displayed on in-line terminals, in addition to those displayed on Standalone ECRs.

	IN-LINE ERROR CODE AND MESSAGE TABLE
	(to be added to the table for the Standalone Level)
Error Message	Cause of Error
(Standard Setting)
FILE BUSY	A designated file is already occupied by other terminal.
IRC CONNECT ERR	Transmission cannot be executed due to the connection error (Disconnection of
	the line, or Master Terminal’s power is OFF, etc.)
MASTER IS BUSY	An inquiry file is being used.
PLEASE BACK UP	RTR Declaration cannot be canceled due to the Backup Error
TRANS BUFF FULL	Satellite Transaction Buffer is full.

3- 1