![6OPTIONAL FAN INSTALLATION](/images/new-backgrounds/206226/20622611x1.webp)
6OPTIONAL FAN INSTALLATION
Provision has been made on the stove to install an op- tional blower that comes complete with a variable speed switch to turn the blower on and off as well as adjusting the blower speed. An optional thermostatic sensor control kit, BGD36, to thermally activate the fan is also available.
Use of the fan increases the output of heat. Attach the mount- ing bracket to the blower assembly. Then attach to the back of your stove, push on the variable speed knob and plug into any grounded electrical outlet.
Note: if the optional blower,
Drywall dust will penetrate into the fan bearings, caus- ing irreparable damage. Care must be taken to prevent drywall dust from coming into contact with the fan or its compartment. Any damage resulting from this condi- tion is not covered by the warranty policy.
FIGURE 9
VARIABLE
SPEED
SWITCH
ADJUSTING DOOR CLOSING PRES- SURE
The door mounting screw acts as a cam to position the door latch. A half turn clockwise of the screw takes the latch to a maximum closing pressure; a half turn counter clock- wise turn takes it to the lowest closing pressure.
DOOR MOUNT-
ING SCREW
FIGURE 10