Mode, Resume Troubleshooting, Hold | Philips AX 1101/10 manual

MODE
It is possible to play tracks in random order, to repeat a
single track or the entire CD.
1 Press MODE during playback as often as required in	MODE
	PROGRAM

order to activate one of the following ‘modes’. The
active mode is shown in the display.

ySHUFFLE: All tracks of the CD are played in random order until all of them have been played once.

ySHUFFLE REPEAT ALL: All tracks of the CD are played repeatedly in random order.

yREPEAT: The current track is played repeatedly.

yREPEAT ALL: The entire CD is played repeatedly.

2Playback starts in the chosen mode after 2 seconds.

• To return to normal playback, press MODE repeatedly until the display shows no active modes.

RESUME

TROUBLESHOOTING

WARNING: Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee. If a fault occurs, ﬁrst check the points listed before taking the unit for repair. If you are unable to solve a problem by following these hints, consult your dealer or service centre.

The CD player has no power, or playback does not start

•Check that your batteries are not dead or empty, that they are inserted correctly, that the contact pins are clean.

•Your adapter connection may be loose. Connect it securely.

The indication no diSC is displayed

•Check that the CD is clean and correctly inserted (label-side upward).

•If your lens has steamed up, wait a few minutes for this to clear.

The indication nF diSC is displayed

• CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder.

The indication HOLD is on and/or there is no reaction to controls

•If HOLD is activated, then deactivate it.

•Electrostatic discharge. Disconnect power or remove batteries for a few seconds.

The CD skips tracks

•The CD is damaged or dirty. Replace or clean the CD.

•RESUME, SHUFFLE or PROGRAM is active. Switch off whichever is on.

No sound or bad sound quality.

•PAUSE might be active. Press 2;.

•Loose, wrong or dirty connections. Check and clean connections.

•Volume might not be appropriately adjusted. Adjust the volume.

•Strong magnetic ﬁelds. Check player’s position and connections. Also keep away from active mobile phones.

NOTES

You can interrupt playback and continue (even after an extended period of time) from the position where playb- ack stopped (RESUME) and you can lock all buttons of the set so that no action will be executed (HOLD). Use the RESUME–HOLD–OFF slider for these functions.

1Switch the slider to RESUME during playback to activate RESUME.

yRESUME is shown.

2Press 9 whenever you want to stop playback.

3Press 2; whenever you want to resume playback. yRESUME is shown and playback continues from

where you have stopped last.

•To deactivate RESUME, switch the slider to OFF. yRESUME goes off.

H O	L D
H O
U M E
R E S
F
O F
T
OU
INE
p/L

HOLD
You can lock the buttons of the set by switching the
slider to HOLD. Now, when a key is pressed, no action			OL D
will be executed. This is of use, for example, when trans-			E H
		S U	M
	O F
	R E
porting the player in a bag. With HOLD activated, you can	INEO
	UT
avoid accidental activation of other functions.	p/L
avoid accidental activation of other functions.
1 Switch the slider to HOLD to activate HOLD.
yAll buttons are locked. HoLd is shown when
you press any button. If the set is switched off,
HoLd will be shown only when 2; is pressed.

2To deactivate HOLD, switch the slider to OFF.

Note: If you deactivate HOLD by switching the slider to RESUME, you will be activating the RESUME function.

AX 1101/10 specifications

The Philips AX 1101/10 is a portable cassette player that brings an impressive combination of classic design and modern functionality. This device captures the nostalgia of cassette playback while integrating essential features for contemporary users. Aimed at a diverse audience, the AX 1101/10 is designed for music enthusiasts who appreciate both retro and practical audio solutions.

One of the standout features of the Philips AX 1101/10 is its robust playback capabilities. The device supports standard cassettes, allowing users to enjoy their favorite tapes with ease. The built-in speaker delivers decent sound quality, making it ideal for casual listening. Furthermore, the player is equipped with a headphone jack for private listening sessions, catering to those who prefer a more personal audio experience.

In terms of design, the AX 1101/10 boasts a compact and lightweight build, making it highly portable. Users can effortlessly carry it around, whether they're heading to a picnic, a friend's house, or just moving between rooms. The sleek and straightforward interface adds to its appeal, ensuring that anyone, regardless of their tech-savviness, can operate it without a hitch.

The player’s durability is commendable, as Philips has crafted it using materials designed to withstand wear and tear. This resilience is crucial for users who may want to take their cassette player on the go. It is powered by batteries, providing the convenience of untethered use, although an AC adapter option is available for indoor listening.

Another essential characteristic of the Philips AX 1101/10 is its tape management features. The player comes with a rewind and fast-forward functionality, allowing users to navigate through their cassettes efficiently. This practical aspect enhances the overall user experience by eliminating the frustration often associated with searching for specific tracks.

Inspired by the love for vintage audio, the Philips AX 1101/10 not only delivers in performance but also captures the charm of cassette media. Its blend of classic and modern qualities makes it a unique offering for anyone looking to enjoy the rich sounds of their cassette collection while embracing the portability of contemporary technology. Whether for personal use or as a gift for a loved one, the Philips AX 1101/10 is sure to satisfy both nostalgic and practical audio needs.