Philips AX2200/00Z, AX 2201 quick start Features / Troubleshooting

FEATURES

Programming track numbers

You can store up to 30 tracks to play in a program. A single track may be stored more than once in the program.

1While playback is stopped, select a track with

° or ¤.

2Press PROG to store the track.

yPROG lights up; the track number	E S P
programmed and P with the total number of
stored tracks are displayed.

3Select and store all desired tracks in this way.

4Press 2; to start playback of your selected tracks. yPROG is shown and playback starts.

•You can review the program by pressing PROG for more than 2 seconds.

yThe display shows all the stored tracks in sequence.

Notes: – If you press PROG and there is no track select-	E S P
ed, SELECt is displayed.

–If you try to store more than 30 tracks, FULL is displayed.

Clearing the program
• While playback is stopped, press 9 to clear program.	E S P
yCLEAr is displayed once, PROG goes off, and
the program is cleared.

4

PROG

PROG

FEATURES / TROUBLESHOOTING

RESUME and HOLD
You can interrupt playback and continue (even after an
extended period of time) from the position where
playback stopped (RESUME) and you can lock all buttons
of the set so that no action will be executed (HOLD). Use
the RESUME–HOLD–OFF slider for these functions.	INE O
	L
	UT/
RESUME – continuing from where you have stopped
1 Switch the slider to RESUME during playback to acti-	E S P
vate RESUME.	RESUME
yRESUME is shown.

2Press 9 whenever you want to stop playback.

3Press 2; whenever you want to resume playback.

yRESUME is shown and playback continues from where you have stopped.

•To deactivate RESUME, switch the slider to OFF. yRESUME goes off.

HOLD – locking all buttons

You can lock the buttons of the set by switching the slider to HOLD. Now, when a key is pressed, no action will be executed. This is of use, for example, when transporting the player in a bag. With HOLD activated, you can avoid accidental activation of other functions.

1 Switch the slider to HOLD to activate HOLD. E S P HOLD

yAll buttons are locked. HoLd is shown when you press any button. If the set is switched off, HOLD will be shown only when 2; is pressed.

2To deactivate HOLD, switch the slider to OFF.

Note: The program will also be cleared if the power supply is interrupted, or if the CD-player lid is opened, or if the set switches off automatically.

Note: If you deactivate HOLD by switching the slider to RESUME, you will be activating the RESUME function.