DIGITAL TUNER | CD PLAYER |
TUNING TO RADIO STATIONS
English
1.Select TUNER source.
™ | is displayed briefly and then the radio station |
| frequency, waveband and, if programmed, a preset number is |
| shown. |
2.Press BAND once or more to select your waveband.
3.Press SEARCH ∞ or § (for AZ2035 model only: or on the remote control TUNING ∞ or §) and release when the
frequency in the display starts running.
™The tuner automatically tunes to a station of sufficient
reception. Display shows | during automatic tuning. |
™If an FM station is received in stereo, STEREO is shown.
4.Repeat step 3 if necessary until you find the desired station.
• To tune to a weak station, press SEARCH ∞ or § briefly and repeatedly until you have found optimal reception.
A M |
BATT |
LOW |
To improve radio reception
–For FM, pull out the telescopic aerial. Incline and turn the aerial. Reduce its length if the signal is too strong (very close to a transmitter).
–For MW (AM), the set is provided with a
Programming radio stations
You can store up to a total of 30 radio stations in the memory.
1.Tune to your desired station (see Tuning to radio stations).
2.Press PROG to activate programming.
– Display: PROGRAM flashes.
3.Press PRESET 4 or 3 once or more to allocate a number from 1 to 30 to this station.
4.Press PROG again to confirm the setting.
–Display: PROGRAM disappears, the preset number and the frequency of the preset station are shown.
5.Repeat the above four steps to store other stations.
•You can overwrite a preset station by storing another frequency in its place.
Tuning to preset stations
Press PRESET 4 or 3 until the desired preset station is displayed.
PLAYING A CD
|
| FM |
|
| STEREO |
E |
|
|
• • • |
|
|
SEARCH |
| |
| PROG | SEARCH • • • |
|
| |
|
| BAND |
|
| PRESET |
|
| F M |
BATT | P R O G R A M | S T E R E O |
LOW | ||
This CD player plays Audio Discs including
1.Select CD source.
™ | and | are displayed briefly, | if |
| no CD is inserted. |
|
|
8