RECORDING
English
GENERAL INFORMATION ON RECORDING
•Recording is permissible insofar as copyright or other rights of third parties are not infringed.
•This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording, use NORMAL type cassettes (IEC I) on which the tabs have not yet been broken.
•The best recording level is set automatically. Altering the VOLUME, INCREDIBLE SURROUND, ULTRABASS or ULTRA HIGH CLARITY controls will not affect the recording in progress.
•At the very beginning and end of the tape, no recording will take place during the 7 seconds when the leader tape passes the
recorder heads.
• To protect a tape from accidental erasure, have the tape in front of you and break out the left tab.
Recording on this side is no longer possible. If, however, you wish to record over this side again, cover the tabs with a piece of adhesive tape.
SYNCHRO START CD RECORDING
1.Select CD source.
2.Insert a CD and if desired, programme track numbers.
3.Press STOP•OPEN 9/ to open the cassette door.
4.Insert a suitable cassette into the cassette deck and close the
| cassette door. |
5. | Press RECORD 0 to start recording. |
– | Playing of the CD programme starts automatically from the |
| B A |
| beginning of the programme. It is not necessary to start the |
| CD player separately. |
To select and record a particular passage within a track
• | Press and hold down SEARCH ∞ or § |
| |
| (for AZ2035 model only: or on the remote control ¡ or ™). | FM | |
• | When you recognize the passage you want, release | ||
| |||
| SEARCH ∞ or §. |
| |
• | To pause CD playback press PLAY 2; (for AZ2035 model only: |
| |
| or on the remote control 2;). | FM | |
– | Recording will begin from this exact point in the track when you | ||
STEREO | |||
|
| M | |
| press RECORD 0. | ODE | |
| • • • | ||
| SEARCH | ||
| PROG | ||
|
| SEARCH • • • | |
|
| BAND |
6.For brief interruptions press PAUSE ;. To resume recording, press PAUSE ; again.
7.To stop recording, press STOP•OPEN 9/.
12