Honda Power Equipment QP205SH manual Pump Components

Page 14

PUMP COMPONENTS

Figure 3 shows a typical application using the QP205SH centrifugal pump. Please note that this pump is intended for the removal of clean water.

3

 

2

4

 

 

1

 

 

6

 

2

 

 

8

 

4

 

 

 

 

5

 

 

6

 

 

7

4

 

NOTE:

9

 

CONTACT YOUR NEAREST

 

MULTIQUIP DEALER FOR

QUICK DISCONNECT HOSES

AND FITTINGS.

Figure 3. Pump Application

1.Discharge Port 1.5-Inch— Connect a flexible rubber hose to this 1.5-inch discharge port (1) on the pump. Make sure that the hose lays flat and is not kinked. Use only recommended type discharge hose. Contact Multiquip Parts Department for ordering information.

2.Discharge Port 1-Inch— Connect a flexible rubber hose to these 1-inch discharge ports (2) on the pump. Make sure that the hose lays flat and is not kinked. Use only recommended type discharge hose. Contact Multiquip Parts Department for ordering information.

3.Fill Cap — Prior to operation, the pump casing should be filled with water. Remove this cap to add water to the pump. After the initial prime, a sufficient amount of water will be retained in the casing so that the operator will not need to re-prime later.

4.Worm Clamp — Used to secure the hose to the inlet and outlet ports on the pump. Use two clamps to secure the hose on the inlet side of the pump.

5.Discharge Hose — Connect a flexible rubber hose to the discharge port on the pump. Make sure that the hose lays flat and is not kinked. Use only recommended type discharge hose. Contact Multiquip Parts Department for ordering information.

6.Pump — The model QP205SH is a 2-inch centrifugal pump and should only be used in only clear water applications (agricultural, industrial, residential) as they have a limited solid handling capability of only 10% by volume.

7.Drain Plug — Remove this plug to drain water from the pump.

8.Suction Hose — Connect this flexible rubber hose to the suction port on the pump. Make sure that the hose lays flat and is not kinked. Use only recommended type suction hose. Contact Multiquip parts department for ordering information.

9.Strainer — Always attach a strainer to bottom side of the suction hose to prevent large objects and debris from entering the pump. Strainer should be positioned so that it will remain completely under water. Running the pump with the strainer above water for long periods can damage pump.

PAGE 14 — QP205SH CENTRIFUGAL PUMP • OPERATION AND PARTS MANUAL — REV. #3 (01/29/14)

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model QP205SH This Manual Must Accompany the Equipment AT ALL TimesProposition 65 Warning Page Table of Contents QP205SH Centrifugal PumpParts Ordering Procedures Ordering parts has never been easierSafety Information Safety Messages„ Never open the priming plug when pump General SafetyPump Safety Serious damage to the equipment or engineBefore servicing equipment Engine SafetyFuel Safety „ Use well-insulated gloves when picking up the battery Battery Safety Electric Start onlyTransporting Safety Emissions Information Label must remain with the engine for its entire lifeDry Net Weight Specifications PumpSpecifications Pump ModelEngine Specifications EngineSpecifications Engines General Information Pump Components Drain Plug Remove this plug to drain water from the pumpMuffler Used to reduce noise and emissions Basic EngineInitial Servicing Oil Type Inspection EngineBefore Starting SeasonSetup Starting the Engine Place the engine ON/OFF switch See in the on positionOperation Place the engine fuel valve lever See to the on positionPlace the fuel shut-off lever See in the OFF position Stopping the EngineAlways run engine at full speed while pumping Maintenance Pump Pump Vacuum TestPump Vacuum Tester Engine Maintenance Schedule Maintenance EngineEngine Maintenance First EveryWeekly Engine AIR CleanerDaily Engine OILSpark Arrester Cleaning Spark Arrester RemovalStorage Pump StorageSymptom Possible Problem Solution Difficult to start Troubleshooting EngineEngine Troubleshooting Operation not satisfactorySymptom Possible Problem Solution Troubleshooting ENGINE/PUMPPump Troubleshooting Sample Parts List Explanation of Code in Remarks ColumnSuggested Spare Parts Qty DescriptionPump Assembly 0181050825 18141001601378350350 0191150525Engine Service Parts 28462ZH8003 17620ZOT30517620Z4H020 17210ZE1822Terms and Conditions of Sale Parts Freight PolicyPage HERE’S HOW to GET Help

QP205SH specifications

The Honda Power Equipment QP205SH is a powerful and versatile portable generator designed for both residential and commercial use. This generator is renowned for its reliability, efficient performance, and user-friendly features, making it an ideal choice for a wide range of applications, from powering tools on job sites to providing backup electricity during outages at home.

At the heart of the QP205SH is a robust Honda GX160 engine, known for its longevity and fuel efficiency. This 163cc four-stroke engine delivers a maximum output of 2,000 watts, ensuring that it can handle most household appliances and power tools without a hitch. The generator is equipped with a low-oil shutdown feature, which automatically turns off the engine when oil levels become critically low, preventing potential damage and extending the life of the unit.

One of the standout features of the QP205SH is its advanced inverter technology. This technology provides clean and stable power, making it safe for sensitive electronics such as laptops and smartphones. The inverter system also reduces fuel consumption, allowing for extended run times on a single tank of gas. The generator boasts up to 8.1 hours of continuous operation at half load, which is particularly beneficial for extended use during power outages or while camping.

Portability is another key characteristic of the QP205SH. Weighing in at just 46 pounds, the generator is lightweight and equipped with a convenient handle, making it easy to transport to various locations. The compact design ensures that it can fit in tight spaces, whether it's in the back of a vehicle or tucked away in a storage shed.

The QP205SH features multiple outlets, including two 120V household outlets and one 12V DC output for battery charging. This versatility allows users to connect and power multiple devices simultaneously. The generator also comes with a noise-dampening design that keeps operational sound to a minimum, ensuring that it doesn’t disturb the peace in residential areas or during outdoor activities.

In summary, the Honda QP205SH portable generator is a stellar option for anyone in need of reliable, efficient power. With its durable engine, inverter technology, portability, and user-friendly features, it stands out as a top choice for both home and professional use. Whether you’re preparing for an emergency or simply need extra power for outdoor events, the QP205SH is equipped to meet your needs.
Top Page Image Contents