Honda Power Equipment QP205SH manual Setup

Page 17

SETUP

1.Place pump as near to water as possible, on a firm flat, level surface.

2.To prime pump, remove fill cap (See Figure 3) and fill pump casing with water. If the pump casing is not filled with water before starting, it will not begin pumping.

3.Attach suction and discharge hoses to the pump. Check that all hoses are securely attached to the pump. Make certain suction hose (See Figure 3) does not have any air leakage. Tighten hose clamps and couplings as required.

4.It is recommended that 2 clamps be used when securing the suction hose to the inlet side (suction) of the pump.

5.Remember suction hoses must be rigid enough not to collapse when the pump is in operation.

6.Check that the discharge hose (See Figure 3) is not restricted. Place hose so that it lays as straight as it is possible on the ground. Remove any twists or sharp bends from hose which may block the flow of water.

NOTICE

Suction and discharge hoses are available from Multiquip. Contact your nearest dealer for more information.

7.The discharge hose is usually a collapsible (thin-walled) hose, however if a thin-walled discharge hose is not available, a rigid suction hose can be substituted in its place.

8.Make sure the suction strainer (See Figure 3) is clean and securely attached to the water end of the suction hose. The strainer is designed to protect the pump by preventing large objects from being pulled in to the pump.

CAUTION

The strainer should be positioned so it will remain completely under water. Running the pump with the strainer above water for long periods can damage the pump.

QP205SH CENTRIFUGAL PUMP • OPERATION AND PARTS MANUAL — REV. #3 (01/29/14) — PAGE 17

Image 17
Contents This Manual Must Accompany the Equipment AT ALL Times Model QP205SHProposition 65 Warning Page QP205SH Centrifugal Pump Table of ContentsOrdering parts has never been easier Parts Ordering ProceduresSafety Messages Safety InformationPump Safety General Safety„ Never open the priming plug when pump Serious damage to the equipment or engineBefore servicing equipment Engine SafetyFuel Safety „ Use well-insulated gloves when picking up the battery Battery Safety Electric Start onlyTransporting Safety Label must remain with the engine for its entire life Emissions InformationSpecifications Pump Specifications PumpDry Net Weight ModelEngine Specifications EngineSpecifications Engines General Information Drain Plug Remove this plug to drain water from the pump Pump ComponentsMuffler Used to reduce noise and emissions Basic EngineInitial Servicing Before Starting Inspection EngineOil Type SeasonSetup Operation Place the engine ON/OFF switch See in the on positionStarting the Engine Place the engine fuel valve lever See to the on positionPlace the fuel shut-off lever See in the OFF position Stopping the EngineAlways run engine at full speed while pumping Pump Vacuum Test Maintenance PumpPump Vacuum Tester Engine Maintenance Maintenance EngineEngine Maintenance Schedule First EveryDaily Engine AIR CleanerWeekly Engine OILSpark Arrester Removal Spark Arrester CleaningPump Storage StorageEngine Troubleshooting Troubleshooting EngineSymptom Possible Problem Solution Difficult to start Operation not satisfactorySymptom Possible Problem Solution Troubleshooting ENGINE/PUMPPump Troubleshooting Explanation of Code in Remarks Column Sample Parts ListQty Description Suggested Spare PartsPump Assembly 1378350350 18141001600181050825 0191150525Engine Service Parts 17620Z4H020 17620ZOT30528462ZH8003 17210ZE1822Freight Policy Terms and Conditions of Sale PartsPage HERE’S HOW to GET Help

QP205SH specifications

The Honda Power Equipment QP205SH is a powerful and versatile portable generator designed for both residential and commercial use. This generator is renowned for its reliability, efficient performance, and user-friendly features, making it an ideal choice for a wide range of applications, from powering tools on job sites to providing backup electricity during outages at home.

At the heart of the QP205SH is a robust Honda GX160 engine, known for its longevity and fuel efficiency. This 163cc four-stroke engine delivers a maximum output of 2,000 watts, ensuring that it can handle most household appliances and power tools without a hitch. The generator is equipped with a low-oil shutdown feature, which automatically turns off the engine when oil levels become critically low, preventing potential damage and extending the life of the unit.

One of the standout features of the QP205SH is its advanced inverter technology. This technology provides clean and stable power, making it safe for sensitive electronics such as laptops and smartphones. The inverter system also reduces fuel consumption, allowing for extended run times on a single tank of gas. The generator boasts up to 8.1 hours of continuous operation at half load, which is particularly beneficial for extended use during power outages or while camping.

Portability is another key characteristic of the QP205SH. Weighing in at just 46 pounds, the generator is lightweight and equipped with a convenient handle, making it easy to transport to various locations. The compact design ensures that it can fit in tight spaces, whether it's in the back of a vehicle or tucked away in a storage shed.

The QP205SH features multiple outlets, including two 120V household outlets and one 12V DC output for battery charging. This versatility allows users to connect and power multiple devices simultaneously. The generator also comes with a noise-dampening design that keeps operational sound to a minimum, ensuring that it doesn’t disturb the peace in residential areas or during outdoor activities.

In summary, the Honda QP205SH portable generator is a stellar option for anyone in need of reliable, efficient power. With its durable engine, inverter technology, portability, and user-friendly features, it stands out as a top choice for both home and professional use. Whether you’re preparing for an emergency or simply need extra power for outdoor events, the QP205SH is equipped to meet your needs.